The AirTAC GFR200C06C3WT AirTAC Filter Regulator, NPT 1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06C3WT is a filter regulator: water and particulate removal plus pressure regulation combined in a single body. This configuration is built in the GFR200 size with a 1/8 in NPT port, a 5 um filter element, a differential-pressure drain and a round pressure gauge with bar scale. The standard regulator covers 0.15-0.9 MPa (20-130 psi) against a maximum inlet pressure of 1.0 MPa (145 psi), and the polycarbonate bowl suits ambient temperatures from -5 to 70 C (non-freezing). A mounting bracket is included.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and catalogue options include manual or automatic drains, a 40 um standard element, square or round gauges with MPa, psi or bar scales, PT, G or NPT threads, a low-pressure regulator type and a reverse/check valve. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C06C3WT AirTAC Filter Regulator, NPT 1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, regulated supply for the clamping fixtures and tool-change cylinders on a CNC machining cell, with the 5 um element protecting fine pilot valves upstream.
Steady regulated air for the pusher and diverter cylinders on a carton packaging conveyor, where the differential-pressure drain keeps condensate moving out of the bowl.
Clean 5 um air at a set pressure for spray guns and air-assisted applicators in an automotive refinish booth, where particulate in the line shows up in the finish.
Size the unit by the port and duty your line needs: this GFR200 model takes a 1/8 in NPT port, and stepping up to GFR300, 400 or 600 raises both port size and capacity. Drain type is a real choice - differential-pressure (fitted here), automatic or manual - and the regulation range follows it, with differential-pressure and automatic units covering 0.15-0.9 MPa (20-130 psi). Filter grade is 40 um standard or 5 um with the W code, which this model carries. Gauge scale (MPa, psi or bar) and thread (PT as the standard, with G and NPT as order options) are also decodable, and a mounting bracket is included.
Because AirTAC publishes flow as curves rather than a single rated figure, we do not quote a flow number here. Send us your application details and we will confirm sizing and the datasheet figures before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR performance as flow curves rather than a single rated figure, so we do not quote a flow number. Tell us your application and we will confirm the datasheet flow figures and check the sizing against your demand before you order.
The W in the code GFR200C06C3WT selects the 5 um filter grade; the catalogue standard is 40 um. Choose 5 um where downstream pilot valves, spray equipment or instruments need finer filtration, and 40 um for general plant air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.