The AirTAC GFR200C06F2T AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06F2T is an AirTAC GFR-series filter regulator: filtration and pressure regulation combined in one body, with no lubricator. This size 200 unit has a 1/8 in NPT port, a 40 um element that removes water and particulate from compressed air, and a differential-pressure drain that bleeds collected condensate automatically as flow passes through. The built-in regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), and the embedded square gauge reads in psi so downstream pressure can be set and monitored at a glance. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). A mounting bracket is included.
This is a genuine AirTAC part. The GFR family is published in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of 40 um or 5 um (code W) filtration, manual, automatic or differential-pressure drains, square or round gauges with MPa, psi or bar scales, G, NPT or PT threads, and an optional reverse/check valve. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GFR200C06F2T AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding clamping cylinders and fixtures on a machine tool, where the 40 um element keeps swarf-contaminated, wet shop air out of the valves and the psi gauge lets the setter dial in and verify the clamp pressure.
Point-of-use preparation for the small cylinders and air cylinders that drive carton forming, sealing and pusher stations, with the differential-pressure drain handling condensate through continuous shifts without operator attention.
Conditioning the air feeding quarter-turn actuators on process valves, where the regulator holds a stable set pressure for repeatable actuation and the filter keeps moisture and pipe scale out of the actuator and solenoid valves.
Size 200 with a 1/8 in port is the smallest step in the GFR range; if your line needs more flow, the next step up is size 300 at 1/4 in, then 400 and 600. Choose the drain to match the installation: differential-pressure (this unit) needs no attention during operation, an automatic drain (code A) dumps condensate at shutdown, and a manual drain (code M) is emptied by hand. The 40 um element on this unit is the standard grade; specify 5 um (code W) where finer particulate removal is needed. The gauge here is the embedded square type reading psi; MPa and bar scales and an external round gauge are the other options. Thread is NPT on this unit, with G (BSPP) and PT available to order, and a bracket is included.
One honest note before you order: AirTAC publishes flow for this family as curves, not as a single rated number, so we do not quote a flow figure here. Send us your application details and we will confirm the datasheet and check the sizing against your required flow before you commit.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR family as curves rather than a single rated figure, so we do not state a flow number for this unit. Tell us your application and required flow and we will confirm the datasheet curve and check that size 200 at 1/8 in NPT is correctly sized before you order.
The differential-pressure drain on the GFR200C06F2T bleeds collected condensate out of the bowl automatically as air flows through it, so it suits continuously running installations. If your line stops regularly, the automatic drain (code A) dumps condensate at shutdown, and the manual drain (code M) is simply emptied by hand where drainage events are rare.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.