The AirTAC GFR200C06F2WK AirTAC Filter Regulator 1/8 in PT, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06F2WK is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady in one compact body. This 200-size unit is threaded PT1/8 (1/8 in), carries the optional 5 um filter element (code W) instead of the standard 40 um grade, and drains condensate by differential pressure, the default drain type. An embedded square gauge reading in psi is fitted, a reverse (check) valve is included (code K), the bowl for this size is polycarbonate, and a mounting bracket comes with the unit.
This is a genuine AirTAC part. The GFR series spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, a choice of differential-pressure, automatic or manual drain, 40 um or 5 um filtration, gauge scales in MPa, psi or bar, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm sizing and any datasheet figure for your application before ordering.
| Model | GFR200C06F2WK AirTAC Filter Regulator 1/8 in PT, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
On a small assembly press, the unit filters plant air and lets the operator set and hold a fixed clamping pressure at the cylinders, with the psi gauge giving a direct setting reference at the station.
Feeding divert and pusher cylinders on a packaging conveyor, the unit supplies cleaned, regulated air so product diversion stays consistent through the shift, with the check valve holding the setting if upstream supply dips.
At a spray booth drop, the 5 um element strips finer particulate ahead of the spray guns while the regulator sets the gun supply pressure, protecting finish quality on each panel.
Step size and port to the job: 200 is the compact end of the GFR range, here with a PT1/8 (1/8 in) port. Pick the drain to match maintenance practice: differential-pressure (as on this unit) as the default, automatic where continuous condensate removal is wanted, or manual where an operator drains on schedule. Filter grade is 40 um standard; this unit's W code selects the finer 5 um element for more sensitive downstream equipment. The embedded square gauge is standard with MPa, psi or bar scales (psi here), and an external round gauge is optional. Thread is PT as the catalogue standard, with G (BSPP) and NPT available as order options. A bracket is included and the check valve (K) is fitted.
Flow for the GFR series is published as curves, not a single rated figure, so send us your flow and pressure requirements and we will confirm the right size against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR-series flow as curves rather than a single rated figure, so we do not quote a number here. Send us your required flow and working pressure and we will confirm sizing from the datasheet on request before you order.
The W in GFR200C06F2WK selects the optional 5 um filter element; the catalogue default without a letter is 40 um. The finer grade suits downstream components that are sensitive to smaller particles. If you want the standard grade, order the same unit without the W code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.