The AirTAC GFR200C06JC2T AirTAC Filter Regulator 1/8 in NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06JC2T is a size-200 filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady, in one compact body. This configuration has 1/8 in NPT ports, the standard 40 um filter element, a differential-pressure drain that bleeds collected condensate automatically when the pressure differential across the element rises, and a round pressure gauge reading in psi. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), and maximum inlet pressure is 1.0 MPa (145 psi). No mounting bracket is fitted with this code.
This is a genuine AirTAC part from the G-series air-treatment line, which spans four sizes (200, 300, 400 and 600) with progressively larger ports and flow capacity, plus options for thread type, drain type, a finer 5 um element and different gauge scales. Because AirTAC publishes flow capacity as curves rather than a single rated figure, we confirm the datasheet and flow figures for your application on request.
| Model | GFR200C06JC2T AirTAC Filter Regulator 1/8 in NPT |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Conditioning and regulating the air supply to solenoid-valve banks that drive process valves on a small skid, where clean, dry, steady-pressure air keeps valve shifting consistent.
Feeding filtered, regulated air to the cylinders and grippers on a carton-sealing or labelling line, where the 1/8 in port suits compact point-of-use supply drops.
Supplying regulated air to small clamping cylinders and air tools at an assembly bench, with the psi gauge giving the operator a clear set-point readout.
Start with the port step: this unit is 1/8 in NPT, the smallest G-series port, so match it to lines where compact supply runs are sufficient and step up to a larger size (300/400/600) if the application needs more air. The 40 um element suits general plant air; choose the W code variant if finer filtration is required. The differential-pressure drain is the default and works well on steady-duty lines; automatic or manual drain variants exist for other duty patterns. The round psi gauge is fitted here; square embedded gauges and MPa or bar scales are alternatives, and PT (standard) or G threads can be ordered instead of NPT.
Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow capacity for this series as performance curves, not as a single rated figure, so there is no one flow number we can quote. Send us your application details and we will confirm the flow figures from the datasheet on request before you order.
The C2 code in GFR200C06JC2T specifies an external round gauge with a psi scale. The embedded square gauge is the standard fitting, and MPa or bar scales can be ordered instead - just ask for the corresponding gauge code variant when you enquire.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.