The AirTAC GFR200C06JC2WK AirTAC Filter Regulator PT1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06JC2WK is an AirTAC GFR200 filter regulator: filtration and pressure regulation combined in one body for compressed air. This configuration is the compact size 200 unit with a 1/8 in PT port, a 5 um filter element (the finer of the two catalogue grades), a differential-pressure drain that bleeds collected water automatically as flow passes through, an external round pressure gauge reading in psi, and a built-in reverse/check valve that holds downstream pressure when the supply is lost. The polycarbonate bowl suits non-freezing compressed-air duty, with a maximum inlet pressure of 1.0 MPa (145 psi), a regulation range of 0.15-0.9 MPa (20-130 psi) and an operating temperature of -5 to 70 C. No mounting bracket is fitted on this variant.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of 40 um or 5 um filtration, differential-pressure, automatic or manual drains, gauge styles and scales, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR200C06JC2WK AirTAC Filter Regulator PT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds filtered, regulated air to the pneumatic clamps and tool-change cylinders on a compact machining centre, with the 5 um element protecting fine-seat valves from particulate carryover.
Sits ahead of the pick-and-place and sealing cylinders on a carton packaging line, holding a steady regulated pressure while the check valve keeps actuators from venting during a supply dip.
Supplies clean, regulated air to bench-top test rigs and clamping fixtures, where the 5 um grade and psi-reading gauge give the fine control these setups need at a small 1/8 in port.
Start with the port step: this unit is size 200 with a 1/8 in PT port; larger sizes (300/400/600) move up through 1/4 in to 1 in and correspondingly higher flow capacity, so match the size to the air demand of the downstream circuit. On filtration, 40 um is the standard element and this unit carries the 5 um (W) grade - choose it when finer particulate removal matters downstream. The differential-pressure drain is the default and suits continuous-flow lines; automatic or manual drains are alternatives in the family. Gauge style and scale are selectable (this one is an external round gauge in psi), and PT is the standard thread with G and NPT available as order options. This variant has no mounting bracket. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote one number. Tell us your application and we will confirm the flow and datasheet figures for this exact model on request before you order.
The W in the code sets the 5 um filter grade (the standard grade is 40 um), and the K adds a reverse/check valve that holds downstream pressure when supply is lost. Both are catalogue options on the GFR family; the 5 um grade suits finer downstream components and the check valve suits circuits that must not dump on an air failure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.