The AirTAC GFR200C06JC2WTK AirTAC Filter Regulator NPT1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06JC2WTK is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This configuration is built with a 1/8 in NPT port, a fine 5 um filter element (the W grade, tighter than the standard 40 um), a differential-pressure drain that bleeds condensate automatically as flow passes through, a round external gauge reading in psi, and a built-in reverse/check valve that holds the downstream setting if upstream pressure is lost. No mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi), the standard regulator adjusts from 0.15-0.9 MPa (20-130 psi), and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part from the GFR filter-regulator line, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, a choice of differential-pressure, automatic or manual drains, 40 um or 5 um filtration, gauge styles and scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GFR200C06JC2WTK AirTAC Filter Regulator NPT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use conditioning for a machining centre's pneumatic valves and actuators: the 5 um element protects fine spool fits from particulate while the regulator holds a steady setting, and the check valve keeps the circuit from dumping if shop air drops.
Feeding the air cylinders on a carton-forming or wrapping conveyor, where the fine filter keeps moisture and debris out of the valve bank and the psi gauge lets operators verify the setting at a glance during changeover.
Supplying filtered, regulated air to analytical instruments or purge cabinets, where the 5 um grade and stable downstream pressure protect sensitive components and the check valve prevents backflow into the supply line.
Size 200 with a 1/8 in port is the entry step of the GFR range; step up through sizes 300, 400 and 600 when your line needs larger ports and more flow. The 5 um element in this code suits air that feeds sensitive components; choose the standard 40 um grade where coarser protection is enough. The differential-pressure drain works continuously with flow and needs no operator attention; automatic and manual drains are the alternatives on other codes. The round psi gauge matches US-style reading; embedded square gauges and MPa or bar scales are also available. NPT thread suits US piping; PT and G (BSPP) are order options, and brackets can be added where panel or wall fixing is needed.
Because flow is published as curves rather than a single rating, we do not quote a rated flow number for this unit. Send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a rated flow figure. Tell us your application and we will confirm the flow data from the datasheet on request before you order.
The W in the code specifies the optional 5 um element, one grade finer than the 40 um standard. It is chosen where downstream components need tighter protection from particulate. If your application is fine with standard filtration, a 40 um version of the same size-200, 1/8 in NPT filter regulator is available.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.