The AirTAC GFR200C06JF1T AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06JF1T is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This size 200 unit carries a 1/8 in NPT port, a 40 um standard filtration element, and a differential-pressure drain that bleeds collected condensate automatically whenever the pressure differential across the element rises. The fitted square pressure gauge reads in MPa, and the standard regulator covers an adjustment range of 0.15-0.9 MPa (20-130 psi). Maximum inlet pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). The PC (polycarbonate) bowl suits the size 200 frame, and this configuration is supplied without a mounting bracket and without a reverse/check valve.
This is a genuine AirTAC part. The GFR filter-regulator family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, and with options including manual or automatic drains, a 5 um (code W) filter element, alternative gauge scales in psi or bar, G (BSPP) or NPT threads in place of the PT standard, and bracket variants. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GFR200C06JF1T AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feed clean, regulated air to the tool-change clamps and pneumatic actuators on a CNC machining centre, with the 40 um element protecting directional valves from swarf-laden condensate and the MPa gauge giving the operator a direct setpoint readout at the machine.
Regulate the air feeding conveyor stoppers, diverters and carton-closing cylinders on a packaging line, where the differential-pressure drain keeps condensate out of the cylinders without requiring an operator to bleed the bowl each shift.
Supply filtered, pressure-controlled air to the doffer and take-up cylinders on textile spinning machinery, where the compact size 200 footprint and 1/8 in port suit the tight manifold space beside the machine frame.
Start with the port and size step: this unit is size 200 with a 1/8 in NPT port, the smallest step in the GFR range; step up to GFR300/400/600 with 1/4 in to 1 in ports when the circuit demands more flow. Choose the drain to match maintenance access: differential-pressure (as fitted here) drains on pressure drop, automatic (code A) drains continuously, and manual (code M) requires operator action - note the regulation range differs by drain type, with manual-drain units adjusting from 0.05 MPa. Filter grade is 40 um as standard on this unit; specify code W for 5 um where finer particulate capture is needed. The fitted square gauge reads MPa; psi and bar scales and an external round gauge are order options. Thread is NPT here; PT is the AirTAC standard and G (BSPP) is also a catalogue option. This configuration has no mounting bracket (code J) - order a bracket variant if panel or wall fixing is required.
Because AirTAC publishes flow as curves rather than a single rated number, we cannot quote a rated flow figure here. Send us your application's flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as performance curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number for this unit. Tell us your application's flow and working pressure and we will confirm the sizing against the manufacturer datasheet on request before you order.
The blank drain position in the code selects the differential-pressure drain, which discharges collected condensate automatically when the pressure drop across the 40 um element rises - no operator action needed. If your maintenance routine prefers a scheduled bleed, the same size 200 unit is available with a manual drain (code M) or a fully automatic drain (code A); note that the regulator adjustment range for this unit with differential-pressure drain is 0.15-0.9 MPa (20-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.