The AirTAC GFR200C06JF2T AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06JF2T is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size 200 unit has a 1/8 in NPT port, standard 40 um filtration, a differential-pressure drain, and a built-in square gauge reading in psi. Maximum inlet pressure is 1.0 MPa (145 psi), the regulating range is 0.15-0.9 MPa (20-130 psi), and the working temperature range is -5 to 70 C (non-freezing). The bowl on this size is polycarbonate, and no mounting bracket is included with this configuration.
This is a genuine AirTAC part. The GFR series spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, a choice of differential-pressure, automatic or manual drains, an optional 5 um filter element (code W), gauge scales in MPa, psi or bar, and G (BSPP) or NPT thread options alongside the PT standard. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and datasheet details for your application.
| Model | GFR200C06JF2T AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use filtration and regulation for the cylinders and seal jaws on a carton-sealing or wrapping line, with the psi gauge giving operators a local setpoint readout at the machine.
Conditioning and regulating the compressed air feed to a laboratory test bench or fixture-clamping circuit, where the 40 um element keeps water and debris out of sensitive valves.
Regulated air for diverter and gate cylinders on a sorting conveyor, holding actuator pressure steady as line demand changes through the shift.
Size and port step up together across the GFR range (200/300/400/600), so pick the size whose flow curve covers your demand rather than the port alone; this code is the size 200 body with a 1/8 in NPT port. Drain type is a real choice: this unit uses the differential-pressure drain (the default), while automatic (code A) and manual (code M) versions exist in the series. Filtration is the standard 40 um element, with 5 um (code W) available where finer protection is needed. The embedded square gauge here reads in psi; an external round gauge and MPa or bar scales are options. Thread is PT as the catalogue standard, with G (BSPP) and NPT as order options - this code specifies NPT. Bracket is omitted (code J) where panel or existing mounting is used. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves, not a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and sizing from the datasheet on request.
This unit uses the differential-pressure drain, the default for the GFR series. Automatic (code A) and manual (code M) drain versions are available in the series if you prefer a different draining method.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.