The AirTAC GFR200C06JF2WG AirTAC Filter Regulator G1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06JF2WG is a 200-size filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This configuration carries a 1/8 in G-thread port, a fine 5 um filter element (the W grade, against the 40 um standard), a differential-pressure drain that bleeds collected condensate automatically whenever the pressure differential across the element is high enough, and an embedded square gauge reading in psi. The standard regulator covers an adjustment range of 0.15-0.9 MPa (20-130 psi) with a maximum inlet pressure of 1.0 MPa (145 psi), and the unit operates from -5 to 70 C in non-freezing conditions. The polycarbonate bowl suits the 200 size, and no mounting bracket or reverse/check valve is fitted in this variant.
This is a genuine AirTAC part from the GFR filter-regulator family, which spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drains, 40 um or 5 um filtration, and gauges scaled in MPa, psi or bar. PT is the standard thread, with G and NPT available as order options. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C06JF2WG AirTAC Filter Regulator G1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Conditioning and regulating the air feeding pneumatic clamps and tool-changer actuators on a machining centre, where the 5 um element helps keep fine control valves clear of water and particles.
A point-of-use filter regulator feeding the sorting, filling and wrapping cylinders on a packaging conveyor, holding a stable set pressure so the station cycles consistently through the shift.
Local air conditioning for small grippers and sample-handling actuators on lab automation, where the compact 200-size body and 1/8 in port suit tight manifolds and short drops.
Size the GFR range by stepping through 200 / 300 / 400 / 600 and the matching port (here 1/8 in G thread) against the flow your circuit needs - because flow is published as curves, not a single rating, ask us to confirm sizing before ordering. Choose the drain to match maintenance access: differential-pressure (as fitted here) drains on demand with no operator input, automatic drains on a cycle, and manual drains only when someone opens them. Pick 40 um for general protection or the 5 um W grade (this unit) for finer downstream valves; select the gauge scale (MPa, psi or bar - psi here); and order PT (standard), G or NPT thread to suit your piping. A bracket is optional on this family; this variant ships without one.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR range as curves rather than a single rated figure, so there is no one number we can honestly quote. Tell us your line pressure, set pressure and the cylinders or valves you are feeding, and we will confirm the sizing from the datasheet curves before you order.
PT is the standard thread on the GFR family, and G (BSPP) and NPT are catalogue options you order by suffix. This configuration is specified with the G thread and a 1/8 in port; if your installation is piped in NPT or PT, ask us for the equivalent model code in that thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.