The AirTAC GFR200C06JF2WGK AirTAC Filter Regulator G1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06JF2WGK is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure at your setpoint in one compact body. This 200-size unit is threaded G1/8 (BSPP), carries the 5 um filter element (code W) instead of the standard 40 um, drains condensate by differential pressure, and regulates from 0.15 to 0.9 MPa (20-130 psi). It comes with the embedded square gauge scaled in psi and a built-in reverse/check valve, mounts without a bracket, and its polycarbonate bowl suits the -5 to 70 C (non-freezing) working range at up to 1.0 MPa (145 psi) maximum inlet pressure.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, a choice of differential-pressure, automatic or manual drain, 40 um or 5 um filtration, PT, G or NPT threads, gauge scale options and optional brackets. Flow for GFR units is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures for your application on request.
| Model | GFR200C06JF2WGK AirTAC Filter Regulator G1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding filtered, regulated air to gripper valves on a small assembly robot, where the 5 um element protects pilot valves from fine particulate and the check valve helps hold the setpoint during supply dips.
Supplying clean, regulated air to a laboratory analyzer's pneumatic sample-handling actuators, where the 5 um grade and a stable psi setpoint keep sensitive components working predictably.
Regulating air to pusher and diverter cylinders on a packaging conveyor, with the differential-pressure drain quietly removing condensate collected across a shift.
Choose the size by port and flow demand: 200 with G1/8 is the entry step, and stepping up to 300, 400 or 600 raises both port size and flow capacity - match the published curve to your air consumption rather than guessing. This unit's decodable choices are already fixed: the 5 um element for finer particulate and water control than the standard 40 um, a differential-pressure drain (automatic and manual drains are orderable alternatives), the square gauge scaled in psi (MPa or bar scales, or an external round gauge, are options), and a reverse/check valve that helps hold the downstream setpoint when supply dips. The thread here is G (BSPP); PT is the standard thread and NPT is an order option, and brackets are optional across the range. Because AirTAC publishes flow as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Tell us your working pressure and air consumption and we will confirm the flow and full datasheet figures for GFR200C06JF2WGK on request.
The W in the code sets the 5 um filter grade instead of the standard 40 um, for finer protection of downstream components. The trailing K fits a reverse/check valve, which helps hold the downstream setpoint if upstream supply falls. Both are standard decodable options in the GFR range, as are the drain type, gauge scale and thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.