The AirTAC GFR200C06JF2WT AirTAC Filter Regulator NPT1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06JF2WT is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady in one compact body. This configuration is the size 200 frame with a 1/8 in NPT port, the optional 5 um filter element (the finer of the two published grades), a differential-pressure drain, and an embedded square pressure gauge reading in psi. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature is -5 to 70 C, non-freezing. On this size the bowl is polycarbonate, and the J suffix means no mounting bracket is included. No reverse/check valve is fitted.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in up to 1 in, and each size can be ordered with manual or automatic drain instead of the differential-pressure default, a 40 um or 5 um element, square or round gauges in MPa, psi or bar scales, G (BSPP), NPT or PT threads, and with or without a mounting bracket. Flow for this unit is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GFR200C06JF2WT AirTAC Filter Regulator NPT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, regulated air to workholding clamps and tool-change cylinders on a CNC machining centre, with the 5 um element suiting fine pneumatic valves downstream of the unit.
A steady regulated supply to sealing jaws and carton-closing cylinders on a packaging conveyor, where the differential-pressure drain handles condensate without daily manual draining.
Clean, pressure-stabilised air to positioners and pilot valves on a process skid, with the square psi gauge giving operators a local reading at the setpoint.
Choose the size by port and capacity step: 200 is the smallest frame with a 1/8 in port, while 300, 400 and 600 step up in port size and flow. Drain type is a real choice: differential-pressure (as fitted here, the default), automatic (code A) for unattended condensate removal, or manual (code M) where you drain by hand - note the regulation range differs by drain type. Filter grade is 40 um standard or 5 um with the W code, as on this unit. Gauges are an embedded square gauge as standard or an optional external round gauge, with MPa, psi or bar scales; this unit carries a square psi gauge. Threads are PT as the standard, with G (BSPP) and NPT as catalogue options - this model is specified in NPT. The J suffix omits the mounting bracket. Flow is published as curves, not a single rating, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Tell us your operating pressure and air demand and we will confirm the flow from the datasheet for this exact configuration before you order.
PT is the standard thread across the G-series, but G (BSPP) and NPT are catalogue options you select when ordering, and the T suffix on this code specifies NPT. The thread is a specification choice to match your piping - it is not a delivery or availability matter. If you need PT or G instead, ask us for the equivalent code in the same size and options.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.