The AirTAC GFR200C06JF2WTK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06JF2WTK is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and holds downstream pressure in one compact body. This size 200 unit has a 1/8 in NPT port, a 5 um filter element (code W), a differential-pressure drain, a PC (polycarbonate) bowl, an embedded square gauge reading in psi, and a reverse/check valve fitted (code K); the J code means no mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi), and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family is published in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, PT as the standard thread and G or NPT to order, plus drain, filter-grade, gauge and bracket choices across the range. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C06JF2WTK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use filter regulation for a machining centre's actuators and tool-change cylinders: the 5 um element guards fine control valves while the regulator holds the machine's set pressure from a shop-air drop line.
Feeding pick-and-place and sealing cylinders on a packaging conveyor, where the fitted reverse/check valve helps hold downstream pressure through supply dips and the square psi gauge lets operators verify the line setting at a glance.
Supplying stable, fine-filtered air to lab analysers and test rigs, with the 5 um element and set-and-read regulator giving a clean, controlled point-of-use supply from the building's compressed-air ring main.
Size and port step up together: 200 with a 1/8 in NPT port suits compact circuits, while 300, 400 and 600 serve progressively higher demand - we can check the published curve against your air consumption. This unit carries the 5 um element (code W); the 40 um standard element is the choice where only coarse protection is needed. The drain here is differential-pressure; automatic (A) and manual (M) drains are available in the family. The embedded square gauge is fitted with a psi scale (MPa and bar scales exist, and an external round gauge is optional), and the K code means a reverse/check valve is fitted. Thread on this code is NPT; PT is the standard thread and G is the other order option. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number here. Send us your air consumption and working pressure and we will confirm from the datasheet whether this size 200 unit with the 1/8 in NPT port is correctly sized for your application.
W is the filter-grade code: this unit carries the 5 um element instead of the 40 um standard element. Choose 5 um where downstream valves, cylinders or instruments need finer protection, and 40 um where coarse water and particulate removal is enough. Both grades are available across the GFR family.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.