The AirTAC GFR200C06JF3WT AirTAC Filter Regulator NPT1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06JF3WT is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This size 200 unit carries a 1/8 in NPT port, a 5 um filter element (the finer of the two catalogue grades), and a differential-pressure drain that bleeds condensate automatically whenever the pressure differential across the element is high enough, so no manual draining routine is needed. The standard regulator covers an adjustment range of 0.15-0.9 MPa (20-130 psi), the embedded square gauge reads in bar, and the maximum inlet pressure is 1.0 MPa (145 psi). The polycarbonate bowl suits ambient temperatures of -5 to 70 C (non-freezing), and this configuration is supplied without a mounting bracket and without a reverse/check valve.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, a choice of differential-pressure, automatic or manual drains, 40 um or 5 um filter elements, square or round gauges with MPa, psi or bar scales, optional brackets and optional reverse/check valves. Flow figures for this series are published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GFR200C06JF3WT AirTAC Filter Regulator NPT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding cleaned, regulated air to the directional valves and cylinders on a carton-forming packaging machine, where the 5 um element protects the valve spools from particulate carryover and the bar-scale gauge lets the line crew set and verify working pressure at a glance.
Conditioning the compressed-air supply to a bench-top test rig or laboratory automation cell, where fine filtration ahead of sensitive instruments and a stable, repeatable regulated pressure are part of keeping test results consistent.
Supplying filtered and regulated air to the stopper gates and pusher cylinders along a bottling or canning conveyor, with the differential-pressure drain keeping condensate out of the actuators without adding a daily drain check to the operator round.
Start with the port and size step: this unit is size 200 with a 1/8 in NPT port, the smallest step in the GFR range; if your line draws more air than a 200-body circuit can carry, step up to GFR300/400/600 rather than oversizing the regulator spring. Choose the drain to match how the unit is attended: differential-pressure drain (as fitted here) needs no operator action, automatic drain suits unmanned installations, and manual drain suits attended panels. Choose the filter grade to match the downstream demand: 40 um is the standard element for general plant air, while the 5 um element fitted here suits instruments, valves and components that need finer protection. Pick the gauge scale (MPa, psi or bar) to match the rest of your panel, and order PT, G (BSPP) or NPT threads to suit your piping standard. A mounting bracket is optional, and a reverse/check valve can be specified where you need the outlet held on air failure. Because flow in this series is published as curves rather than a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a figure that is not in the datasheet as a rating. Send us your application details and we will confirm the flow-curve and datasheet figures for this unit on request, so you can size it against your actual air demand before ordering.
The GFR series is offered with a 40 um standard element or a 5 um element (the W option), and this configuration carries the 5 um grade. Choose 5 um where downstream valves, instruments or components need finer protection from particulate; choose 40 um for general plant-air duty where coarser filtration is sufficient. Both grades are available across the GFR range, and we can confirm the right grade for your application on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.