The AirTAC GFR200C06JF3WTK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06JF3WTK is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and holds downstream pressure in one combined body. This size 200 unit is threaded NPT1/8, carries the 5 um filter element (code W), drains condensate by differential pressure through its polycarbonate bowl, and is fitted with an embedded square gauge reading in bar plus a reverse (check) valve; no mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi), the regulating range for this differential-pressure-drain configuration is 0.15-0.9 MPa (20-130 psi), and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and catalogue options include manual or automatic drains, the 40 um standard element, MPa, psi or bar gauge scales, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C06JF3WTK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, regulated supply to the cylinder circuit of a small bench press, with the reverse valve preventing backflow and the 5 um element protecting the control valves.
Clean, steady air for the pusher and seal cylinders on a carton packing conveyor, where the differential-pressure drain clears condensate without stopping the line.
Regulated instrument air for a lab or QC test rig, with the square bar gauge giving a direct local reading and the check valve isolating the bench from supply dips.
Size and port set the capacity: 200 is the smallest GFR frame, here with a 1/8 in NPT port - step up to 300, 400 or 600 as your air demand grows. Choose the drain: differential-pressure (this unit), automatic (A) or manual (M). Filter grade is 40 um as standard; this unit carries the finer 5 um W element. Gauge scales come in MPa, psi or bar - this one reads bar - and threads can be ordered in PT (the standard), G or NPT. A mounting bracket is optional (this configuration omits it). Because flow is published as curves rather than a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the datasheet flow curve and correct sizing before you order.
The W code fits the 5 um element, which gives finer filtration of water and particulate where downstream valves and actuators need cleaner air than the 40 um standard element provides. Both grades are catalogue options across the GFR family.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.