The AirTAC GFR200C06JNT AirTAC Filter Regulator, NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06JNT is an AirTAC GFR-series filter regulator: one body that removes water and particulate from compressed air and holds downstream pressure steady. This size 200 configuration has a 1/8 in NPT port, a 40 um filter element, and the differential-pressure drain that is the catalogue default for this family. The standard regulator covers an adjustment range of 0.15-0.9 MPa (20-130 psi) against a maximum inlet pressure of 1.0 MPa (145 psi), and the unit operates from -5 to 70 C (non-freezing). No pressure gauge is fitted and no mounting bracket is included; the bowl on this size is polycarbonate.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, filter grades of 40 um standard or 5 um (code W), automatic or manual drain variants, optional gauges, and G (BSPP) or NPT thread options to order. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C06JNT AirTAC Filter Regulator, NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use clean, regulated air for the tool-clamp and fixture cylinders on a machining center, keeping water and particulate out of the valve spools while holding a set downstream pressure.
Feeding the pneumatic cylinders on carton taping and sealing machines with filtered, regulated air so flap-fold and press strokes behave consistently through the shift.
Installed at the inlet of a manifold-fed control panel to give each valve island one clean, adjustable supply point without needing a separate filter and regulator body.
Pick the size and port against the flow your line needs: 200 is the compact step with a 1/8 in port on this unit, and larger sizes carry more flow. Drain comes as differential-pressure (this configuration), automatic (A) or manual (M); filter grade is 40 um standard or 5 um with code W. Gauges are optional - an embedded square gauge or an external round gauge with MPa, psi or bar scales - and this model is supplied without one. Thread is PT as standard, with G (BSPP) and NPT as order options, and brackets are optional and not fitted here. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so there is no one l/min or SCFM number we can quote. Send us your line pressure and air demand and we will confirm the datasheet curve figures for this size 200, 1/8 in NPT unit on request.
This model carries the N gauge code, so it is configured without a gauge. The catalogue offers an embedded square gauge or an external round gauge with MPa, psi or bar scales as options, so a gauge-coded variant can be ordered if you want a visual setpoint reference.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.