The AirTAC GFR200C06LC1WT AirTAC Filter Regulator, NPT1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR series combines water and particulate filtration with pressure regulation in a single body. This GFR200C06LC1WT is the 200 size with a 1/8 in NPT port, built as the low-pressure type (code L) for circuits set well below standard regulator ranges. It carries the 5 um filter element (code W) for finer particle removal than the standard 40 um grade, a differential-pressure drain, and an external round gauge on an MPa scale so the set pressure is visible at the unit. A mounting bracket is included, the bowl is metal, maximum inlet pressure is 1.0 MPa (145 psi), and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans four sizes (200, 300, 400 and 600) covering ports from 1/8 in to 1 in, with manual, automatic or differential-pressure drains, 40 um or 5 um elements, standard or low-pressure regulation, square or round gauges on MPa, psi or bar scales, and PT, G or NPT threads. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GFR200C06LC1WT AirTAC Filter Regulator, NPT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
On a fixture line where pneumatic clamps must be held at gentle, low set pressures, this low-pressure GFR filters the supply and lets the setter dial in and read the holding pressure on the MPa gauge.
Fitted ahead of the directional valves on a cartoning or wrapping line, the 5 um element keeps fine particles out of the valve island while the regulator holds a steady supply pressure.
On a bench that cycles air-driven test gauges and small actuators, the low-pressure regulation and 5 um filtration give a clean, adjustable supply, with the round gauge showing the set point directly.
The real choices within GFR are the size and port (200 to 600, 1/8 in to 1 in), which step up with the flow your line needs; the drain type (differential-pressure as here, automatic, or manual); the filter grade (40 um standard or 5 um as on this unit); the regulator type (standard or low-pressure); the gauge (embedded square as standard, external round as fitted here, on MPa, psi or bar scales); the thread (PT is the standard, with G and NPT as order options); and whether a mounting bracket is included. Because AirTAC publishes flow for this series as curves rather than a single rating, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as performance curves rather than a single rated figure, so there is no one number we can quote. Tell us your line pressure and the flow your application needs and we will confirm the sizing from the datasheet on request.
It marks the low-pressure regulator type, intended for circuits that are set well below standard regulator ranges. The exact adjustment range for the low-pressure type is not published in the material we hold, so we confirm it on request. The rest of the code reads: 200 size, 1/8 in NPT port, round MPa gauge, 5 um filter element, and differential-pressure drain.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.