The AirTAC GFR200C06LC2T AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LC2T is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This configuration has 1/8 in NPT ports, the low-pressure regulator type, standard 40 um filtration, a differential-pressure drain, a round pressure gauge reading in psi, and a mounting bracket included. The metal bowl collects condensate, and the differential-pressure drain bleeds it automatically as flow passes through.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in, and options including manual or automatic drains, a 5 um filter element, square or round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Flow figures are published as curves rather than a single rating, so ask us to confirm sizing and datasheet details for your application.
| Model | GFR200C06LC2T AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
On packaging and converting machines, glue heads and coating applicators run at reduced pressure. This unit filters the shop air to 40 um and holds the low regulated pressure the applicator needs, with the psi gauge giving the operator a direct reading.
Pneumatic positioners and pilot-operated valves on a process skid need clean, steady air at modest pressure. A filter regulator at each take-off point removes water and scale from the header and sets the pilot pressure locally.
A bench setup running low-pressure pneumatic tests needs filtered air and a pressure point the technician can adjust and read. The 1/8 in NPT ports suit compact bench plumbing, and the included bracket fixes the unit to the panel.
Start with the port: this unit is 1/8 in NPT, the smallest in the GFR range, so step up to size 300, 400 or 600 if your line needs larger ports or more flow. Choose the drain to suit access: differential-pressure (this unit) drains with flow, automatic drains on a timer-free basis, and manual suits bowls you can reach for scheduled draining. Filtration is 40 um standard; specify the W code for 5 um where finer protection is needed. Gauges are embedded square as standard with an optional external round gauge in MPa, psi or bar scales - this unit carries the round psi gauge. Threads come as PT standard with G and NPT as order options; brackets are included on this code.
Flow for the GFR series is published as curves, not a single rated figure, so send us your application details and we will confirm sizing against the datasheet before you order. The exact regulation range of the low-pressure type is likewise confirmed on request.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so there is no one number we can quote. Send us your application - line pressure, downstream demand and allowable pressure drop - and we will confirm the sizing from the datasheet before you order.
The L code selects the low-pressure regulator type rather than the standard type, for circuits that work at reduced pressures; its exact adjustment range is not published in the material we hold, so we confirm it on request. This unit also has the differential-pressure drain as standard: condensate collected in the metal bowl is bled off automatically as air flows through, with no manual draining needed between service intervals.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.