The AirTAC GFR200C06LC2TK AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LC2TK is a filter regulator: it removes water and particulate from compressed air through a 40 um element and regulates downstream pressure in the same body. This 200-size unit has a 1/8 in NPT port, a differential-pressure drain on the polycarbonate bowl, a round gauge with psi scale, a built-in check valve and a mounting bracket. It is the low-pressure type (code L); ask us to confirm its adjustment range against your set pressure before ordering.
This is a genuine AirTAC part. The GFR series is available in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, PT as standard and G or NPT to order, with manual, automatic or differential-pressure drains, 40 um or 5 um (W) filtration, gauge choices and check-valve options. Max inlet pressure is 1.0 MPa (145 psi) and working temperature is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so we confirm sizing and datasheet figures on request.
| Model | GFR200C06LC2TK AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, reduced-pressure air for small actuators on cartoning and labelling machines, with the fitted check valve blocking reverse flow in the downstream circuit.
Point-of-use conditioning for bench air at reduced pressure, with a round psi gauge for direct setting and a 40 um element protecting sensitive instruments.
Clean, regulated air to spray guns and air-assisted applicators where a low set pressure, filtered supply and a readable psi gauge are wanted.
Size and port set the air capacity: the 200 size with a 1/8 in NPT port suits compact points of use, while 300, 400 and 600 step up in port and flow. Match the size to your demand using the catalogue flow curves, which we will check against your application on request. Other decodable choices: drain type (differential-pressure as here, automatic A, or manual M), filter grade (40 um standard, 5 um with W), gauge (embedded square as standard, external round optional, in MPa, psi or bar scales), thread (PT standard; G and NPT to order), bracket (J deletes it) and check valve (K). This unit is the low-pressure type, so confirm its adjustment range with us before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so there is no one number to quote. Send us your air demand and line pressure and we will confirm sizing from the datasheet before you order.
K means a reverse (check) valve is fitted, which blocks reverse flow through the unit. Other decodable choices on this family include the drain type, the 5 um (W) filter grade and the gauge scale; this unit also carries a round psi gauge and is the low-pressure type.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.