The AirTAC GFR200C06LC2W AirTAC Low-Pressure Filter Regulator PT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06LC2W is an AirTAC GFR200 filter regulator: a single body that removes water and particulate from compressed air and then regulates the downstream pressure. This configuration is the low-pressure type with a 5 um (code W) filter element, a differential-pressure drain that expels collected condensate from the bowl automatically, a round gauge reading in psi, and the mounting bracket included. The 1/8 in PT port suits compact drop lines, the polycarbonate bowl is standard at this size, and the unit carries a maximum inlet pressure of 1.0 MPa (145 psi) with an operating temperature of -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR series spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, a choice of differential-pressure, automatic or manual drain, 40 um standard or 5 um (W) filtration, embedded square or external round gauges in MPa, psi or bar scales, and PT, G (BSPP) or NPT threads. Published flow data appears as curves rather than a single rating, so ask us to confirm flow and datasheet figures for your application before ordering.
| Model | GFR200C06LC2W AirTAC Low-Pressure Filter Regulator PT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, regulated air for the pneumatic clamp cylinders on the sealing head of a carton-closing conveyor, where a modest setpoint and clean, dry air keep each seal consistent.
Clean, regulated air to pneumatic test fixtures on an electronics or packaging test bench, where the 5 um element protects fine orifices and the psi gauge gives a readable setpoint.
Regulated air feed to spray guns in a small paint finishing booth, where the low-pressure type holds a gentle setpoint and the 5 um element keeps the air free of water and grit.
Choose the size by port and required flow: this unit is size 200 with a 1/8 in PT port, while sizes 300, 400 and 600 step up to 1/4 through 1 in ports for larger lines. Drain options are differential-pressure (fitted here, which auto-drains the bowl on a pressure differential), automatic (A) or manual (M). Filtration is 5 um on this model (code W) instead of the 40 um standard; the round gauge reads psi (scale 2), with MPa or bar scales and an embedded square gauge available as alternatives. Thread is PT as standard, with G (BSPP) and NPT as order options, and the bracket is included. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure and the flow your application needs, and we will confirm the correct size from the datasheet on request.
W selects the 5 um filter element instead of the 40 um standard, giving finer removal of water and particulate ahead of the regulator. This unit also uses the differential-pressure drain, which automatically expels collected condensate from the polycarbonate bowl, and its round gauge reads in psi.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.