The AirTAC GFR200C06LC2WGK AirTAC Filter Regulator G1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06LC2WGK is an AirTAC GFR200 filter regulator: filtration and pressure regulation combined in a single body for compressed air. Water and particulate are spun out and caught in the polycarbonate bowl, which drains automatically by differential pressure as the element loads up. This configuration carries the 5 um (code W) element instead of the standard 40 um, the low-pressure regulator type, a round gauge reading in psi, and a built-in reverse/check valve so downstream pressure cannot back up through the unit. The G1/8 (1/8 in) G-thread port suits compact supply drops, and the mounting bracket is included.
This is a genuine AirTAC part. The GFR200 is the smallest size in the GFR range, which steps up through 300, 400 and 600 for larger ports and higher flow. Across the series you can order the standard 40 um or fine 5 um element, differential-pressure, automatic or manual draining, embedded square or external round gauges scaled in MPa, psi or bar, PT (standard), G or NPT threads, and the low-pressure regulator type fitted here. Flow is published as curves rather than a single rating, so ask us to confirm sizing figures from the datasheet for your application.
| Model | GFR200C06LC2WGK AirTAC Filter Regulator G1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
On an analyzer skid, sample and purge air often needs gentle, stable low-pressure regulation plus fine particulate removal before it reaches sensors. The 5 um element, low-pressure regulator type and check valve in this unit keep the conditioned supply clean and hold the setpoint against backflow from the line.
Small pneumatic grippers and mini cylinders on assembly cells typically run off 1/8 in drops. A GFR200 at each head filters condensed water and fine particles out of the shop air, regulates the supply to the low pressure these compact actuators need, and the round psi gauge gives the operator a local reading.
Positioners and pilot circuits on process control valves need clean, low-pressure instrument air. This filter regulator conditions the supply with 5 um filtration, holds the pilot pressure with the low-pressure regulator type, and the built-in check valve stops line backflow from disturbing the pilot setting.
Start with the port step: the GFR200 takes 1/8 in ports, and moving to GFR300/400/600 buys larger ports and more flow - match the step to your line's air demand rather than oversizing on guesswork. Choose the element grade: 40 um is the standard element, while the 5 um (W) fitted here protects finer downstream components. Choose the drain: differential-pressure (as here) drains only when the element loads up, automatic drains continuously, and manual needs a routine bleed. Choose the gauge and scale - the embedded square gauge is standard and the external round gauge fitted here reads psi; MPa and bar scales are also available. Thread is PT as standard, with G (as coded here) and NPT as order options; a bracket is included unless the J (no-bracket) code is specified. Note that this is the L low-pressure regulator type, and its exact adjustment range is not published - ask us to confirm it from the datasheet. Because flow is published only as curves and not as a single rated figure, send us your application details and we will confirm sizing before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes G-series flow as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number for this unit. Send us your application details - line pressure, downstream demand and port size - and we will confirm the sizing against the datasheet flow curves for you before you order.
The W in the code selects the optional 5 um filtration grade; the standard GFR element is 40 um. The finer 5 um element suits downstream components that are sensitive to fine particulate, such as pilot circuits, instruments and compact actuators. If your application only needs general water and particle knockdown, the 40 um standard grade is the usual choice - we can confirm the right grade from the datasheet on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.