The AirTAC GFR200C06LC2WT AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LC2WT is a size 200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This configuration carries a 1/8 in NPT port, a 5 um filter element (the finer of the two published grades), a differential-pressure drain that bleeds accumulated condensate automatically as flow passes through, and a low-pressure regulator type for circuits that run well below standard working pressures. A round pressure gauge reading in psi is fitted so the setpoint can be read directly, and a mounting bracket is included for panel or wall fixing. The bowl is metal.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, and is ordered with choices of drain type, filter grade, gauge style and scale, thread form and bracket. Flow figures for this series are published as curves rather than a single rating, so we confirm the datasheet and sizing against your application on request.
| Model | GFR200C06LC2WT AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Hold-down clamps and pop-up stops on a router table often run on reduced air pressure. This unit filters the shop air to 5 um ahead of the clamps and holds a low regulated setpoint, with the psi gauge letting the operator verify the clamp pressure at a glance.
A spray booth supply line benefits from fine filtration before the gun. The 5 um element strips water and particulate that would spoil finish quality, while the low-pressure regulator trims the supply down to the gentle pressure the gun and atomising circuit need.
Sorting gates, pushers and diverters on a packaging conveyor use small cylinders that run at modest pressures. This filter regulator conditions the branch line - clean, dry, regulated air - and its differential-pressure drain keeps condensate from accumulating during continuous shifts.
Start with the port step: size 200 with a 1/8 in NPT port suits compact circuits, while sizes 300, 400 and 600 step up in port and flow capacity - match the step to the air demand of the circuit. Choose the drain: differential-pressure (this unit) drains with flow, automatic drains on a timed or level basis, and manual requires periodic draining by hand. Choose the filter grade: 40 um is the standard element and 5 um (code W, as here) protects finer downstream components. Select the gauge style and scale - embedded square or external round, in MPa, psi or bar - and the thread: PT is the standard, with G (BSPP) and NPT available as order options. A bracket can be included or omitted. Because flow for this series is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as performance curves rather than a single rated figure, so we do not quote a rated flow number. Tell us your application and expected air demand and we will confirm the sizing against the datasheet curves on request before you order.
The GFR family is offered with a 40 um standard element or a finer 5 um element, selected with the W code - which is what the WT in this model denotes. The 5 um grade suits circuits feeding sensitive components such as spray guns, precision valves or instruments; the 40 um grade is the general-purpose choice. The differential-pressure drain on this unit carries condensate away automatically as air flows through.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.