The AirTAC GFR200C06LC2WTK AirTAC Filter Regulator 1/8 in NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06LC2WTK is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This 200-size unit is built with a 1/8 in NPT port, a 5 um filter element (code W), the differential-pressure drain, and the low-pressure (L) regulator type for circuits that run below standard regulator settings. It is fitted with an external round gauge scaled in psi, a reverse/check valve, a mounting bracket, and a metal bowl. Maximum inlet pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, and options across drain type (differential-pressure, automatic or manual), filtration grade (40 um standard, 5 um with code W), gauge style and scale (embedded square or external round, in MPa, psi or bar), thread (PT is the standard; G and NPT are catalogue options) and bracket. Flow for this family is published as curves rather than a single rating, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GFR200C06LC2WTK AirTAC Filter Regulator 1/8 in NPT |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Conditioning the air feed to spray guns and air-assisted applicators on a paint or coating line, where the low-pressure regulator type and 5 um element suit a circuit that runs clean air at reduced pressure.
Point-of-use filtration and regulation for clamps, collet chucks and air tools at a CNC workstation, with the fitted check valve guarding against reverse flow and the round psi gauge giving a local pressure reading.
Conditioning the supply on a laboratory or QA bench that cycles small actuators and valves, where the 1/8 in NPT port and the smallest 200-size frame of the GFR range fit tight panels and short drop legs.
Size steps through 200, 300, 400 and 600 with ports from 1/8 in to 1 in, so pick the frame whose flow curve covers your circuit - we confirm exact flow from the published curves on request before you order. This unit is already set for 5 um filtration (choose the 40 um standard element where finer filtration is not required) and the differential-pressure drain; automatic (A) and manual (M) drains are catalogue options on the same frame. The L code makes this the low-pressure regulator type rather than the standard setting; its exact adjustment range is not published in our extract, so we confirm it from the AirTAC datasheet. Gauge choices are the embedded square gauge or an external round gauge in MPa, psi or bar scales - this model carries the round psi gauge. Thread here is NPT; PT is the standard thread and G (BSPP) is also available to order. A mounting bracket is included (code J orders the unit without one).
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR family as curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure and downstream demand and we will confirm the sizing against the datasheet curves on request.
This model carries the differential-pressure drain, the default for the GFR family, which discharges collected condensate when the pressure differential across the filter rises sufficiently. If your line runs long periods at low differential, or you want fully manual control, the automatic (A) and manual (M) drains are catalogue options on the same frame - tell us your duty cycle and we will confirm the right choice.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.