The AirTAC GFR200C06LC3T AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LC3T is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size 200 unit has a 1/8 in NPT port, a 40 um standard filter element, and a differential-pressure drain that discharges collected condensate in response to the pressure differential across the element. It is the low-pressure (L) regulator type and is fitted with an external round gauge scaled in bar; the mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family is offered in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, a choice of differential-pressure, automatic or manual drains, a 5 um (W) filter element option, an embedded square gauge as standard or an external round gauge in MPa, psi or bar scales, and PT, G (BSPP) or NPT threads. We confirm flow and other datasheet figures on request, since AirTAC publishes flow as curves rather than a single rating.
| Model | GFR200C06LC3T AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtering and stepping the air supply down to a low, stable set pressure for glue or coating heads on a packaging line, where the low-pressure regulator type matches a reduced setpoint circuit.
Conditioning and regulating air to clamps on a machining or assembly fixture, keeping chips and water out of the valve stack while holding a low regulated pressure at the clamp circuit.
Feeding a laboratory or test bench that needs clean, filtered air held at a low setpoint, with the bar-scale round gauge giving a direct local pressure readout at the rig.
Size and port step up together: 200, 300, 400 and 600 with ports from 1/8 to 1 in, so choose the size whose flow curve covers your consumption. AirTAC publishes flow as curves, not a single rating, so ask us to confirm sizing against your application before ordering. This unit is the low-pressure (L) regulator type; its set range is not published in the catalogue, so confirm it with us if your circuit needs a specific band. Other decodable choices: drain type (differential-pressure as here, automatic, or manual), filter grade (40 um standard, 5 um with code W), gauge (embedded square standard, external round optional, in MPa, psi or bar), thread (PT is the standard; G and NPT are ordered options - this unit is NPT), and bracket (included here). At size 200 the bowl is polycarbonate (PC); only the 600 size uses aluminium alloy. Maximum inlet pressure is 1.0 MPa (145 psi); temperature is -5 to 70 C, non-freezing.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this series as curves rather than a single rated figure, so there is no one l/min or SCFM number we can quote. Send us your port size, upstream pressure and consumption, and we will confirm the sizing from the datasheet on request.
It marks the low-pressure regulator type. The catalogue does not publish the exact set range for the low-pressure version, so if your circuit needs a specific pressure band, contact us and we will confirm it from the datasheet before you order.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.