The AirTAC GFR200C06LC3TK AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LC3TK is a size 200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one compact body. This configuration has a 1/8 in NPT port, the standard 40 um filter element, and a differential-pressure drain that bleeds collected condensate automatically whenever the pressure differential across the element is high enough - no daily manual draining needed. The regulator is the low-pressure type, and this unit is fitted with a round pressure gauge reading in bar, a reverse/check valve, and a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). The bowl on this size is polycarbonate (PC).
This is a genuine AirTAC part. The GFR family is offered in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of PT, G (BSPP) or NPT thread, manual, automatic or differential-pressure drains, an optional 5 um element, square or round gauges with MPa, psi or bar scales, and an optional reverse/check valve. Flow figures for this series are published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GFR200C06LC3TK AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding spray guns on a finishing line: the 40 um element strips water and pipe scale that would fisheye a coating, while the low-pressure regulator holds a steady, gentle setting at the gun.
Supplying air-rinse nozzles above a bottling conveyor, where filtered air blows debris from containers before filling and the gauge lets operators verify the line setting at a glance.
A filtered, regulated low-pressure branch on a CNC cell - for air curtains, coolant mist lines or light clamping - with the check valve holding the circuit if upstream supply dips.
Start with the port and size step: this unit is size 200 with a 1/8 in NPT port, the smallest step in the range - if your line needs more flow, the 300/400/600 sizes step up in both port and capacity. Because flow for this series is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering. Other real choices on this family: drain type (differential-pressure as fitted here, or automatic or manual), filter grade (40 um standard as here, or 5 um with code W), gauge style and scale (this unit carries a round gauge reading in bar; embedded square gauges and MPa/psi scales are the other options), thread (PT is the standard, G and NPT are order options - this unit is NPT), and bracket (included here). Note this is the low-pressure (L) regulator type; we confirm its exact adjustment range from the datasheet on request.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the relevant flow and datasheet figures for this exact model on request.
The L in the code marks the low-pressure regulator variant rather than the standard one, so it is intended for circuits that need a lower controlled pressure. The exact adjustment range for this variant is not published in the material we hold, so we confirm it from the datasheet on request before you order.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.