The AirTAC GFR200C06LC3WTK AirTAC Filter Regulator NPT1/8 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06LC3WTK is an AirTAC GFR200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is the low-pressure (L) regulator type with a 5 um (W) filtration element, a differential-pressure drain on the bowl, a factory-fitted reverse/check valve (K), an included mounting bracket, and a round pressure gauge with a bar scale. The port is NPT1/8 (1/8 in NPT thread; PT is the catalogue standard and G/NPT are order options). Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, a 40 um standard element or the finer 5 um (W) grade, differential-pressure, automatic or manual draining, gauge and thread options, and a low-pressure regulator variant, so a matching unit can be specified for most circuits. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application before ordering.
| Model | GFR200C06LC3WTK AirTAC Filter Regulator NPT1/8 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
On a weaving shed's low-pressure actuation circuit, this unit filters condensed water and lint-carrying particulate out of the supply and holds the reduced pressure the loom's small pneumatic valves were set up for, with the check valve helping hold the circuit if upstream supply dips.
Feeding the pneumatic clamps and hold-downs on a packaging line's sealing head, the 5 um element protects the small directional valves from scoring, while the regulator keeps clamp force consistent as the compressor loading cycles.
On a pilot plant skid where lab actuators and air-operated sample valves run off a shared compressor, this unit gives each take-off its own filtered, reduced-pressure supply, with the bar-scale gauge letting technicians read and log setpoints directly.
The real choices on this family: step through sizes 200/300/400/600 and ports 1/8 to 1 in to match the air your line consumes; choose the 40 um standard element or the 5 um (W) grade fitted here for finer protection of downstream components; pick differential-pressure (default, as on this unit), automatic (A) or manual (M) draining; select the gauge scale (MPa, psi or bar) and the embedded square or external round gauge; order PT (standard), G or NPT thread - this unit is NPT; the mounting bracket is included. Note that the low-pressure (L) regulator type is intended for circuits below the standard range and its exact adjustment range is not published, so confirm it with us. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this family as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and required consumption and we will confirm the sizing against the datasheet curves on request before you order.
K means a reverse (check) valve is factory-fitted; the same unit without K does not include one. The L means this is the low-pressure regulator type, intended for circuits below the standard adjustment range - its exact range is not published, so confirm it with us. The rest of the code decodes as: size 200, NPT1/8 port, 5 um (W) element, differential-pressure drain, round gauge with bar scale, bracket included.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.