The AirTAC GFR200C06LF1T AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06LF1T is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size 200 configuration carries a 1/8 in NPT port, a low-pressure regulator type, a 40 um standard filtration element, and a differential-pressure drain that bleeds collected condensate automatically as flow passes through. A square pressure gauge with an MPa scale is fitted, a mounting bracket is included, maximum inlet pressure is 1.0 MPa (145 psi), and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with larger ports and flow capacity at each step, plus options you can order: PT (standard), G (BSPP) or NPT threads, automatic or manual drains in place of the differential-pressure drain, a 5 um element (code W), alternative gauge scales in psi or bar, and an external round gauge. Flow is published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GFR200C06LF1T AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds and regulates the air circuit that actuates low-pressure clamps and swing cylinders on a machining fixture, with the 40 um element stopping pipe scale and condensed water from reaching the clamp valves.
Supplies regulated, filtered air to benchtop analytical instruments that specify a low-pressure supply, with the fitted MPa gauge giving the operator a direct reading at the panel and the differential drain keeping condensate out of the tubing.
Provides filtered, regulated air to the poppet-actuated diverters and gate cylinders that sort bottles between conveyor lanes, mounted on the included bracket beside the line's valve manifold.
Start with the port and size step: size 200 with a 1/8 in NPT port suits compact supply drops, and stepping up to sizes 300, 400 or 600 buys larger ports and more flow capacity - match the step to the air demand of the circuit rather than the fitting alone. Choose the drain to suit access: the differential-pressure drain on this model needs no attention while air is flowing, an automatic drain (code A) suits unattended installations, and a manual drain (code M) suits points an operator visits routinely. The standard element is 40 um; specify code W for 5 um where downstream valves or instruments need finer protection. Gauge scale can be ordered in MPa (as fitted here), psi or bar, and an external round gauge is available in place of the embedded square gauge. Thread is NPT on this model; PT is the AirTAC standard and G (BSPP) is also an order option, so pick the thread that matches your pipework. This is the low-pressure (L) regulator type; its exact regulation range is not published in the material we hold, so confirm it with us before ordering. Flow for the whole family is published as curves, not a single rating - ask us to confirm sizing against your application before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so there is no one number we can honestly quote. Send us your line pressure, downstream demand and allowable pressure drop, and we will confirm the sizing from the datasheet curves on request before you order.
The L marks the low-pressure regulator type, intended for circuits that run below the pressures a standard regulator is set up for; the exact regulation range for this variant is not published in our material, so confirm it with us. The drain is differential-pressure type: it vents collected condensate automatically whenever air flows through the unit, with no manual draining needed between flow periods.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.