The AirTAC GFR200C06LF1WTK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LF1WTK is a GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This unit is the 200 size with a 1/8 in NPT port, the 5 um filter element (code W) for finer filtration than the standard 40 um grade, and a differential-pressure drain. It is the low-pressure regulator type, so its regulation range differs from the standard range and the exact figure is not published in the catalogue - we confirm it on request. The unit carries the embedded square gauge on the MPa scale, a reverse/check valve, and a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C (non-freezing), and the bowl on the 200 size is PC (polycarbonate).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options for automatic or manual drains, 40 um or 5 um elements, gauge scale, G or NPT threads, and bracket choice. AirTAC publishes flow only as curves rather than a single rating, so we confirm flow and other datasheet figures on request - just ask before ordering.
| Model | GFR200C06LF1WTK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding filtered, low-pressure air to the positioners and pilot valves on an automated valve manifold, where the 5 um element protects small orifices and the regulator holds a gentle setpoint.
Filtering and regulating air to the small cylinders and grippers on a carton-sealing or labelling station, with the fitted check valve guarding the circuit against backflow.
Supplying clean, low-pressure air to instruments and small actuators on a laboratory or QA test bench, where the square MPa gauge gives a direct local readout.
The real, decodable choices on this family: step through sizes 200/300/400/600 for a larger port and more flow; pick the drain type (differential-pressure as here, automatic, or manual); choose the 40 um standard element or the 5 um W grade; set the gauge scale to MPa, psi or bar; order PT as the standard thread or specify G/NPT; and include or omit the bracket. This code is the low-pressure type, so its regulation range is not the standard published range - ask us to confirm it against your setpoint. Flow is published as curves, not a single rating, so send us your application conditions and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Send us your line pressure, setpoint and expected air demand, and we will confirm the flow from the datasheet on request.
This code carries the L option, making it the low-pressure regulator type. Its range differs from the standard GFR range and the exact figure is not published in the catalogue, so we confirm it on request. Everything else is decodable from the code: 5 um element, differential-pressure drain, square MPa gauge, check valve, bracket, and 1/8 in NPT port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.