The AirTAC GFR200C06LF2 AirTAC Filter Regulator PT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR series combines filtration and pressure regulation in a single body: compressed air passes a 40 um filter element that removes water and particulate, then feeds an integrated regulator that sets the downstream pressure. This unit is the size 200 frame with a 1/8 in PT thread, the compact step in the range for point-of-use drops and small actuator circuits. It is the low-pressure type, so it is intended for circuits that hold a reduced setting below the standard regulator span; the exact adjustment range for this variant is confirmed on request. A differential-pressure drain bleeds collected condensate automatically as the pressure differential across the bowl changes, the polycarbonate bowl (standard on size 200) lets you see the fluid level, the embedded square gauge reads in psi, and a mounting bracket is included.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and each size can be ordered with a manual or automatic drain, a 5 um (W) filter element, alternative gauge scales, G (BSPP) or NPT threads in place of the PT standard, and a no-bracket (J) option. Flow figures for the series are published as curves rather than a single rating, so contact us and we will confirm the datasheet and sizing for your application on request.
| Model | GFR200C06LF2 AirTAC Filter Regulator PT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Small pneumatic grippers and vacuum-generator feeds on an SMT bench benefit from a compact 1/8 in filter regulator mounted right at the point of use, with the psi gauge giving operators a readable local setting.
Low-pressure actuator circuits on a filling or capping machine - clamps, pushers and small cylinders - get filtered, moisture-managed air held at a reduced setting, with the differential-pressure drain handling condensate during continuous runs.
Test rigs and lab fixtures that clamp or actuate at reduced air pressure use the low-pressure regulator type to hold a gentle, repeatable setting, while the 40 um element protects sensitive instrumentation downstream.
Start with the port step: this unit is size 200 with a 1/8 in PT port, the smallest frame in the GFR range - step up to size 300, 400 or 600 if your circuit needs a larger port. Because this is the low-pressure (L) type, choose it when the working setting sits below the standard regulator span; ask us to confirm the exact adjustment range for this variant before ordering. The differential-pressure drain is the default and suits steady duty; specify a manual drain (M) for intermittent duty or an automatic drain (A) where unattended moisture removal matters. The 40 um element is standard; order the W suffix for the 5 um grade if downstream equipment needs finer filtration. The square gauge fitted here reads in psi; MPa and bar scales are available, and an external round gauge is an option. PT is the standard thread - G (BSPP) and NPT are order options, not a delivery matter. A bracket is included with this unit; the J suffix omits it. Flow for the GFR series is published as curves, not a single rating, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as performance curves, not as a single rated figure, so we do not quote a number here. Send us your application details - required port size, working pressure and downstream demand - and we will confirm the datasheet and check the sizing against the curves on request before you order.
The L suffix means this GFR200 unit is built as a low-pressure regulator variant, intended for circuits that hold a reduced downstream setting rather than the standard regulator span. The exact adjustment range for this variant is not published in the material we state, so we confirm it on request; the maximum inlet pressure remains 1.0 MPa (145 psi) and the operating temperature is -5 to 70 C, non-freezing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.