The AirTAC GFR200C06LF2GK AirTAC Filter Regulator G1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06LF2GK is an AirTAC GFR200 filter regulator: it removes water and particulate down to 40 um and regulates downstream pressure in a single body. This configuration is the low-pressure type with a G1/8 (1/8 in) G-thread port, a differential-pressure drain, an embedded square gauge reading in psi, a reverse (check) valve fitted, and a mounting bracket included. The polycarbonate bowl suits non-freezing compressed air from -5 to 70 C, with a maximum inlet pressure of 1.0 MPa (145 psi).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in, drain choices (differential-pressure, automatic or manual), an optional 5 um element (code W), gauge scale options, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm sizing figures from the datasheet for your application.
| Model | GFR200C06LF2GK AirTAC Filter Regulator G1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Regulating low-pressure air to gripper and clamp cylinders on a bottling line, with the 40 um element removing water and debris in the same footprint as the valve it feeds.
Trimming supply pressure on a laboratory or QA test bench where low set pressures are required and the embedded square gauge with psi scale gives a direct local readout.
Feeding stopper and gate cylinders on a packaging conveyor at reduced pressure, with the fitted reverse (check) valve as part of the downstream circuit.
Size first: the 200 frame with its G1/8 port is the smallest step in the GFR range; step up to 300, 400 or 600 when the application needs larger ports. Choose the drain: this unit uses the differential-pressure drain, with automatic (A) and manual (M) drains orderable alternatives. The 40 um element is standard; specify code W for 5 um filtration. The square gauge here reads in psi; MPa and bar scales are available, and an external round gauge is optional. Thread: G (BSPP) as coded here, with PT as the catalogue standard and NPT orderable. A bracket is included; a no-bracket version (code J) exists. Because flow is published as curves rather than one rated figure, send us your flow and pressure requirements and we will confirm the correct size from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a figure here. Tell us your flow and pressure requirements and we will confirm the sizing from the datasheet on request.
The L in the code marks the low-pressure regulator type, intended for applications set below the standard range. The exact adjustment range for this variant is not published in our sheet, so we confirm it from the datasheet on request. Everything else decodes normally: G1/8 G-thread port, 40 um element, differential-pressure drain, square psi gauge, check valve fitted, and bracket included.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.