The AirTAC GFR200C06LF2K AirTAC Filter Regulator PT1/8 Low-Press is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06LF2K is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This 200-size unit is threaded PT1/8, is the low-pressure regulator type, and carries the standard 40 um filter element with a differential-pressure drain that bleeds accumulated condensate automatically whenever the pressure differential across the element rises. The embedded square gauge reads in psi, a reverse/check valve is fitted to hold downstream pressure when the supply is lost, and a mounting bracket is included.
This is a genuine AirTAC part from the GFR range, which spans sizes 200, 300, 400 and 600 with port options from 1/8 in to 1 in, PT as standard and G or NPT threads as order options, plus manual or automatic drains, a 5 um filter element, alternative gauge scales and an external round gauge. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures against your application before ordering.
| Model | GFR200C06LF2K AirTAC Filter Regulator PT1/8 Low-Press |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding bench-top test rigs and analytical instruments that run on gentle, regulated air: the low-pressure regulator type and psi-reading square gauge let technicians set and read a modest working pressure, while the 40 um element keeps scale and pipe debris out of sensitive fittings.
Supplying the pilot-air leg of a packaging line's valve bank: the filter stage strips water and particulate before the low-pressure regulator feeds control components, and the fitted check valve holds the pilot circuit's pressure if the main supply dips during a cycle stop.
Conditioning the feed to low-pressure air knives and blow-off nozzles on a coating line: condensate and 40 um-scale dirt are removed ahead of the regulator so the nozzles stay clear, and the differential-pressure drain sheds collected water without a manual bowl visit.
Start with the port step: this unit is 1/8 in PT on the 200-size body, the smallest GFR frame, so match it to lines where 1/8 in piping is correct and step up to a 300/400/600 series if your circuit needs larger ports. The 40 um element suits general plant air; if the application needs finer filtration, the same frame is available with a 5 um element (code W). Drain choice matters: this unit uses the differential-pressure drain (default), while manual (M) and automatic (A) drains are alternatives depending on how the bowl will be serviced.
This is the low-pressure regulator type, chosen where the controlled circuit sits well below standard working pressures; the exact adjustment range for the low-pressure type is not published in the material we hold, so confirm it with us before ordering. The fitted square gauge reads psi; MPa and bar scales and an external round gauge are options. PT is the standard thread, with G (BSPP) and NPT available to order, and the bracket is included in this configuration.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a l/min or SCFM number. Send us your application details and we will confirm the sizing from the datasheet flow curves before you order.
The L in the code marks the low-pressure regulator type, intended for circuits controlled well below standard working pressures; the exact adjustment range for the low-pressure type is not published in our current data, so confirm it with us. The fitted square gauge reads in psi, and MPa or bar scales plus an external round gauge are available as options.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.