The AirTAC GFR200C06LF2T AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LF2T is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is built for a 1/8 in NPT port, carries the standard 40 um filter element, uses a differential-pressure drain, and is fitted with an embedded square gauge reading in psi. The regulator is the low-pressure type, the bowl is metal, and a mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with PT, G and NPT thread options, automatic, manual or differential-pressure drains, an optional 5 um element (code W) and MPa, psi or bar gauge scales. Flow is published as curves rather than a single rating, so we confirm datasheet figures on request before you order.
| Model | GFR200C06LF2T AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use conditioning ahead of the valve island on a cartoning or bagging line, where the low-pressure regulator holds actuator supply steady and the 40 um element keeps debris out of the spools.
Feeding low-pressure clamp cylinders on a machining or assembly fixture; the square psi gauge lets the operator read the set pressure directly, and the differential-pressure drain keeps condensate out of the clamps.
Conditioning pilot air to process control valves on a chemical or water-treatment skid, where a compact 1/8 in NPT filter regulator sits right at the positioner.
Choose the size by port and flow: size 200 with a 1/8 in port suits compact branch lines, while sizes 300, 400 and 600 step up port and flow capacity. Drain type is a real choice - this unit has a differential-pressure drain, with automatic and manual drains available as alternatives. Filter grade is 40 um standard; specify code W for the 5 um element where finer particulate matters. Gauge scale and thread are order choices: this unit reads psi on a square gauge and has NPT threads, with PT and G versions in the catalogue. Because flow is published as curves rather than one rated figure, send us your line pressure and demand and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure and downstream demand and we will confirm the flow and the full datasheet figures for this 1/8 in NPT unit on request.
The regulator on this unit is the L low-pressure type rather than the standard type. The exact adjustment range for the low-pressure type is not published in our data, so send us your target set pressure and we will confirm suitability on request. The fitted square gauge on this unit reads in psi.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.