The AirTAC GFR200C06LF2TK AirTAC Low-Pressure Filter Regulator 1/8 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LF2TK is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size 200 unit has NPT 1/8 in ports, a 40 um standard filter element, and the low-pressure regulator type for circuits that run below standard line pressure. Collected condensate is expelled by the differential-pressure drain as the pressure drop across the element rises. Maximum inlet pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C (non-freezing), and the bowl on this size is polycarbonate. The unit includes an embedded square psi gauge, a reverse/check valve, and a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in and PT, G or NPT threads, with differential-pressure, automatic or manual drains, 40 um or 5 um (code W) elements, and gauge options. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GFR200C06LF2TK AirTAC Low-Pressure Filter Regulator 1/8 in |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds filtered, low-pressure air to the pneumatic grippers and switching valves on a laboratory sample-prep bench, with the fitted check valve blocking reverse flow if the supply dips.
Supplies regulated air to the diverting cylinders and stop gates along a packaging conveyor, where the 40 um element keeps debris out of the directional control valves.
Regulates air to the clamping cylinders on a light-duty assembly press, with the embedded square psi gauge giving the operator a direct reading at the setpoint.
The real choices in this family start with size and port: step up through 200, 300, 400 and 600 against the air demand of your circuit. Published flow is a set of curves, not one number, so tell us your demand and we will confirm the right size from the datasheet. Drain type is differential-pressure on this unit; automatic (A) and manual (M) drains are order options. The 40 um element is standard and a 5 um element (code W) is available when finer filtration is needed. The L code makes this the low-pressure regulator type; AirTAC does not publish a single set-range figure for it, so confirm the range with us. The gauge is the embedded square type with a psi scale; MPa or bar scales and an external round gauge can be ordered. Thread here is NPT, with PT (the standard) and G as the other catalogue options. A mounting bracket is included and the J code deletes it.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure and air demand and we will confirm the flow and sizing from the datasheet on request.
The L code makes this the low-pressure regulator variant of the GFR200, intended for circuits set below the standard regulator range; AirTAC does not publish a single set-range figure for it, so confirm the range with us. Everything else on this unit is standard: NPT 1/8 in ports, 40 um element, differential-pressure drain, square psi gauge, fitted check valve and included bracket.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.