The AirTAC GFR200C06LF2WGK AirTAC Filter Regulator G1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
GFR200C06LF2WGK is an AirTAC GFR200 filter regulator: a 200-size unit that removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration carries a G1/8 (1/8 in) port with G (BSPP) thread, a 5 um filter element (the W grade; 40 um is the standard grade), a differential-pressure drain and a metal bowl. The regulator is the low-pressure type, and the unit is fitted with the embedded square gauge on a psi scale (an external round gauge is optional), a reverse/check valve (code K) and a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family runs in 200, 300, 400 and 600 sizes covering ports from 1/8 in up to 1 in, with manual or automatic drain options, a 40 um or 5 um element, gauge scale choices of MPa, psi or bar, and PT, G or NPT threads to order. Because AirTAC publishes flow only as curves rather than a single rated figure, we confirm flow and other datasheet figures for your application on request.
| Model | GFR200C06LF2WGK AirTAC Filter Regulator G1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds filtered, regulated air to the gripper cylinders on a robotic pick-and-place cell where the circuit calls for a low set pressure and 5 um filtration to protect the valve stack.
Sits ahead of the clamp and heat-seal cylinders on a packaging conveyor, cleaning the air and holding a stable low regulated supply so the seal cycle repeats without pressure drift.
A single-body supply for laboratory test benches that need water- and particulate-free air regulated down to low pressures, with the psi-scale gauge matching US test gauges.
Within the GFR range you step size first: 200, 300, 400 and 600 cover ports from 1/8 in up to 1 in, and the right step depends on the flow your circuit needs. AirTAC publishes flow as curves, not a single rating, so ask us to check the curve against your application before ordering. This configuration is already fixed as a 200-size unit with a G1/8 port, a 5 um element (code W, against the 40 um standard grade), a differential-pressure drain, the low-pressure regulator type, an embedded square gauge on a psi scale, a fitted reverse/check valve and an included mounting bracket. Thread here is G (BSPP); PT is the series standard and G or NPT can be ordered. If your circuit runs at conventional set points rather than low ones, the standard-type GFR200 with its published 0.15-0.9 MPa (20-130 psi) adjustment range is the alternative to compare.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes G-series flow as curves rather than a single rated figure, so there is no one l/min or SCFM number we can quote for this model. Tell us your supply pressure and the flow your actuators need, and we will confirm the sizing against the datasheet curve on request.
W is the filter-grade code: this unit carries the 5 um element instead of the 40 um standard grade. Choose 5 um where downstream valves, cylinders or instruments need finer particulate removal; the differential-pressure drain and every other code position on this unit are unchanged.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.