The AirTAC GFR200C06LF2WT AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LF2WT is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is built with a 1/8 in NPT port, the low-pressure regulator type, a 5 um filter element (code W), a differential-pressure drain on the bowl, and an embedded square gauge scaled in psi. A mounting bracket is included, and the maximum inlet pressure is 1.0 MPa (145 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drain, 40 um standard or 5 um (W) filtration, gauge scale options, and PT, G or NPT threads. Flow figures are published as curves rather than a single rating, so we confirm the datasheet and sizing on request.
| Model | GFR200C06LF2WT AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds filtered, regulated air to the solenoid valves and small actuators that drive a cartoning or wrapping machine, with the low-pressure regulator holding a gentle setpoint for delicate clamp and pusher cylinders.
Conditions the shop-air line feeding benchtop pneumatic fixtures and test rigs, where the 5 um element keeps fine particulate out of sensitive components and the psi gauge gives a clear local pressure readout.
Supplies the compact vacuum and gripper cylinders on a small assembly station, combining water and particle removal with low-pressure regulation in one body to save panel space at the 1/8 in take-off.
Size the unit by the port step: this model is size 200 with a 1/8 in NPT port, and the GFR range steps up through 300, 400 and 600 for larger ports and higher flow demand. The 5 um element (code W) suits applications needing finer particulate removal than the 40 um standard element; the differential-pressure drain bleeds accumulated condensate automatically as flow passes through. The square gauge here reads in psi; MPa and bar scales are alternatives, and an external round gauge is optional. Thread is NPT on this unit, with PT (standard) and G also orderable, and the bracket is included.
Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so there is no one rated flow number we can quote. Tell us your application and we will confirm the flow and sizing from the datasheet on request.
The W in the code specifies the 5 um filter element instead of the 40 um standard, for finer particulate removal. With no drain letter in the code, the bowl uses the differential-pressure drain, which bleeds condensate automatically as air flows through - no manual draining routine is needed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.