The AirTAC GFR200C06LF3TK AirTAC Filter Regulator 1/8 in NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR series combines water and particulate filtration with pressure regulation in a single body. This GFR200C06LF3TK is the size 200 unit with a 1/8 in NPT port, a 40 um standard filter element and a differential-pressure drain, so condensate is handled without manual draining. The L in the code marks the low-pressure regulator type, and the unit is fitted with an embedded square gauge scaled in bar, a reverse/check valve and a mounting bracket. The bowl on this size is polycarbonate.
This is a genuine AirTAC part, rated for a maximum inlet pressure of 1.0 MPa (145 psi) and an operating temperature of -5 to 70 C (non-freezing). The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options include automatic or manual drains, a 5 um element (code W), gauge scales in MPa, psi or bar, an external round gauge, and G (BSPP) or NPT threads in place of the PT standard. Flow is published only as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GFR200C06LF3TK AirTAC Filter Regulator 1/8 in NPT |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds the clamp cylinders on a fixture line with cleaned, regulated air at reduced pressure, holding the set clamping pressure while the 40 um element keeps scale and pipe debris out of the downstream valves.
Supplies the diverters and pusher cylinders on a packaging conveyor with filtered, regulated air; the differential-pressure drain keeps condensate out of the line without daily manual draining.
Suits bench rigs and pilot skids that run at reduced supply pressure, where the low-pressure regulator type and a bar-scaled square gauge make setpoint adjustments straightforward.
Choose the size by the port and flow step: 200 is the smallest of the four GFR sizes (200/300/400/600), here with a 1/8 in NPT port. Drain choice is differential-pressure (this unit), automatic (A) or manual (M). The 40 um element is standard; specify W for the 5 um grade when finer filtration is needed. The embedded square gauge is fitted here with a bar scale; MPa or psi scales and an external round gauge are the alternatives. Thread is NPT on this code; PT is the AirTAC standard and G (BSPP) is also available to order. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes G-series flow as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow curves and datasheet figures for the GFR200C06LF3TK on request.
L marks the low-pressure regulator type; the exact regulation range for the low-pressure version is not published in our data, so we confirm it on request. The trailing T means the port is 1/8 in NPT; PT is the AirTAC standard thread and G (BSPP) is available to order.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.