The AirTAC GFR200C06LJC2G AirTAC Filter Regulator G1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LJC2G is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This unit is built on the 200 size with a G1/8 (1/8 in) G-thread port, a low-pressure regulator type, a 40 um standard filter element and a differential-pressure drain that discharges collected condensate automatically as the pressure differential changes in service. A round gauge scaled in psi is fitted so the set pressure can be read directly, the bowl is metal, and no mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the GFR series, which spans the 200, 300, 400 and 600 sizes with ports from 1/8 in up to 1 in. Across the series you can order manual or automatic drains in place of the differential-pressure drain, a 5 um element (code W) in place of the 40 um standard, gauge scales in MPa, psi or bar, PT, G or NPT threads, and brackets where needed. Flow for this size is published as curves rather than a single rated figure, so ask us to confirm the datasheet numbers for your application before ordering.
| Model | GFR200C06LJC2G AirTAC Filter Regulator G1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding low-pressure air to clamp and hold-down cylinders on a carton-sealing line, where the regulator holds a gentle set pressure and the 40 um element keeps water and debris out of the directional valves.
Point-of-use supply to spray guns in a paint or coating booth: filtered, regulated air at low set pressures, with the fitted psi gauge letting an operator verify the gun supply at a glance.
Regulated low-pressure air to blow-off and sorting jets on a bottling conveyor, where the differential-pressure drain keeps condensate out of the jet circuit without daily manual draining.
Choose the size and port by the flow your line needs: the 200 size here carries a G1/8 (1/8 in) G-thread port, and the larger 300, 400 and 600 sizes step up in port and capacity. If your set pressures sit below the standard regulator band, the low-pressure type (code L) fitted here is the right choice - its exact adjustment range is not published in our sheet, so confirm it with us. Drain choice matters: the differential-pressure drain fitted here needs no daily attention, while automatic (A) and manual (M) versions are orderable. The element is the 40 um standard; specify W for the 5 um grade when downstream equipment needs finer filtration. The round psi gauge fitted here can be ordered with MPa or bar scales instead, and the embedded square gauge is the standard arrangement. Threads come as PT (the standard), G or NPT to order, and brackets are optional - this unit is supplied without one. Flow is published as curves, not a single rating, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Send us your required flow and working pressure and we will confirm the datasheet curve for this 200-size, G1/8 unit before you order.
The drain fitted here discharges collected condensate automatically as the pressure differential across the unit changes in service, so no daily manual draining is needed. If you prefer a different arrangement, manual (M) and fully automatic (A) drain versions can be ordered instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.