The AirTAC GFR200C06LJC2K AirTAC Filter Regulator PT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06LJC2K is an AirTAC GFR-series filter regulator: one body that removes water and particulate from compressed air and holds downstream pressure at your setpoint. This 200-size unit is built on a PT1/8 port with PT thread as standard, a 40 um standard filter element, and the series-default differential-pressure drain. It is the low-pressure regulator type, and it is fitted with a round pressure gauge reading in psi plus a reverse (check) valve (code K); it comes without a mounting bracket (code J). The bowl on 200-size units is polycarbonate (only 600-size units use aluminium alloy). Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family runs in 200, 300, 400 and 600 sizes with ports from 1/8 to 1 inch, drain choices (differential-pressure, automatic or manual), a 5 um element option (code W), gauge and thread options, and standard or low-pressure regulator types. Flow for this series is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet and sizing for your application before you order.
| Model | GFR200C06LJC2K AirTAC Filter Regulator PT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, regulated air to the air-operated glue applicator pump, where the low-pressure type holds a modest setpoint and the 40 um element keeps the pump's air valve free of grit and condensed water.
Air preparation for pick-and-place gripper cylinders moving bottles between lanes; the round psi gauge lets line technicians verify the setting at a glance and the check valve stays fitted in the circuit.
A lab bench manifold feeding small air-operated valves and actuators, where the 40 um filtration and a visible psi setting keep bench instruments behaving consistently day to day.
The real choices you can decode from the code: the 200 size steps up to 300, 400 and 600 with larger ports (1/8 through 1 inch) as your flow demand grows; the drain here is differential-pressure, with automatic (A) and manual (M) available in the same frame; the 40 um element is standard and 5 um (code W) is the finer option; the round gauge on this unit reads psi, with an embedded square gauge and MPa or bar scales as alternatives; thread is PT as standard with G and NPT as order options; and this configuration has no mounting bracket (code J), though brackets are available. This is the low-pressure regulator type, and its exact set range is not published, so confirm it with us. Flow for the GFR series is published as curves, not a single rating - ask us to check the curve against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the datasheet curve and sizing for this unit on request before you order.
This unit uses the series-default differential-pressure drain. If you want the bowl emptied automatically, order the A (automatic) version; if you prefer to drain by hand during maintenance, the M (manual) version is available in the same 200 size and PT1/8 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.