The AirTAC GFR200C06LJC2WGK AirTAC Filter Regulator G1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06LJC2WGK is an AirTAC GFR200 filter regulator: water and particulate filtration plus pressure regulation combined in a single body. This configuration takes a G1/8 (1/8 in) port with G (BSPP) thread, carries the 5 um filter element (code W, finer than the 40 um standard), drains by differential pressure, and is built on the low-pressure regulator type. A round gauge with a psi scale is fitted, a reverse (check) valve is built in, and no mounting bracket is included. The size 200 bowl is polycarbonate (PC); maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
Genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in up to 1 in, and options across drain type (differential-pressure, automatic or manual), filter grade (40 um standard, 5 um with W), gauge type and scale (MPa, psi or bar), thread (PT standard, with G and NPT as order options) and bracket. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GFR200C06LJC2WGK AirTAC Filter Regulator G1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Regulating filtered air down to the low pressure a robotic gripper circuit needs, with the 5 um element protecting the gripper valve from fine particulate and the built-in check valve holding the circuit if upstream supply dips.
A bench rig running instruments or small test cylinders at reduced line pressure: the low-pressure regulator type, fine 5 um filtration and a local psi-scale gauge let an operator set and read the supply without a separate filter unit.
Feeding stoppers, gates and small actuators along a packaging conveyor, where the combined filter regulator keeps water and fine particles out of the directional valves while holding a low, stable pressure setting.
Choose the size and port against the flow your line needs: size 200 with a G1/8 port is the smallest step in the GFR range, and each larger size steps up port and flow capacity. This unit is already specified with the 5 um (W) element instead of the 40 um standard, a differential-pressure drain, a round psi-scale gauge and a built-in check valve; if you need automatic or manual draining, a different gauge scale, or the 40 um grade, those are decodable options within the same family. Thread here is G (BSPP); PT is the standard thread and G or NPT are order options, and a mounting bracket can be added if required. Because flow is published as curves rather than a single rating, send us your application conditions and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a l/min or SCFM number. Send us your inlet pressure, set pressure and expected air demand, and we will confirm the flow from the datasheet for this exact G1/8, 5 um configuration before you order.
W selects the 5 um filter element instead of the 40 um standard, giving finer particulate removal ahead of the regulator. This unit also carries the low-pressure regulator type, a round psi-scale gauge, a built-in check valve and a differential-pressure drain, and it has no mounting bracket; each of these is a decodable option in the GFR family.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.