The AirTAC GFR200C06LJF1TK AirTAC Filter Regulator NPT 1/8 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06LJF1TK is an AirTAC GFR filter regulator: one body that first removes water and particulate from compressed air, then regulates the downstream pressure. This size 200 unit is threaded NPT 1/8 in, carries the 40 um standard filter element, and drains condensate by differential pressure (the default drain). It is the low-pressure regulator type (code L), comes with the embedded square gauge on an MPa scale, and has a reverse/check valve (code K) fitted; no mounting bracket is included.
This is a genuine AirTAC part. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). The bowl on this size is polycarbonate (PC) - only the 600 size uses aluminium alloy. The GFR family spans sizes 200 to 600 with ports from 1/8 in to 1 in, drain choices (differential-pressure, automatic, manual), an optional 5 um element (code W), G/NPT thread options and gauge/scale choices. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application.
| Model | GFR200C06LJF1TK AirTAC Filter Regulator NPT 1/8 in |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Filtered, regulated air for actuated gates, pushers and diverters on a carton or case packaging conveyor, with the built-in square gauge giving operators a visible setpoint at the machine.
Point-of-use air preparation for pneumatic actuators on laboratory automation and sample-handling benches, where the low-pressure regulator type suits circuits that run below full line pressure.
Feeding filtered, regulated air to pneumatic screwdrivers and torque tools at an assembly cell, with the fitted reverse/check valve protecting the set circuit against backflow.
Every choice in this family is decodable from the code: step up or down a size (200/300/400/600) and port (1/8 in to 1 in) to match the air demand of the circuit; choose the drain (differential-pressure as here, automatic with A, or manual with M); pick the 40 um standard element or the finer 5 um option (W); select the gauge scale (MPa, psi or bar) or an external round gauge; order PT (the standard), G or NPT threads; and add or omit the mounting bracket. The L in this code selects the low-pressure regulator type - its exact regulation range is not published in our data, so confirm it with us. Because flow is published as curves rather than a single rated figure, ask us to check the curve against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow curve and correct sizing from the datasheet on request.
It selects the low-pressure regulator type instead of the standard type. The exact regulation range for the low-pressure type is not published in our datasheet extract, so we confirm it on request; maximum inlet pressure remains 1.0 MPa (145 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.