The AirTAC GFR200C06LJF1WTK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR series combines filtration and pressure regulation in one body: compressed air is cleaned of water and particulate, then passed to a regulator. This unit, GFR200C06LJF1WTK, is a size 200 filter regulator with a 1/8 in NPT port. It is built as a low-pressure type and carries a 5 um filter element (the finer of the two published grades), a differential-pressure drain, an embedded square pressure gauge scaled in MPa, and a reverse/check valve. No mounting bracket is included in this configuration.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and can be ordered with manual or automatic drains, the 40 um standard element, alternative gauge scales, a G (BSPP) or NPT thread in place of the PT standard, and an optional bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. This unit is fitted with a metal bowl. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application.
| Model | GFR200C06LJF1WTK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Cleaned, regulated air for pilot circuits and valve positioners in a plant instrument-air cabinet, where the low-pressure type and 5 um element serve sensitive control loops.
Air preparation for glue heads and spray nozzles on a carton-sealing conveyor, holding a set downstream pressure while the drain handles accumulated condensate.
Regulated air to pneumatic clamps and swing cylinders on machining fixtures, with the fitted check valve in line and the square MPa gauge giving the operator a direct setting reference.
Every choice on this series is decodable from the code: size and port (200/300/400/600, 1/8 in to 1 in) stepped against the flow your circuit needs; drain type (differential-pressure as fitted here, automatic, or manual); filter grade (40 um standard, or the 5 um element on this unit); gauge (embedded square as standard, optional external round, scaled in MPa, psi or bar - this unit reads MPa); thread (PT is the standard, with G and NPT as order options - this unit is NPT); bracket (not included here); and, on regulator versions, standard or low-pressure type - this unit is low-pressure, and its exact adjustment range is not published, so confirm it with us. Flow is published as curves, not a single rating: send us your application and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this series as curves rather than a single rated figure, so no rated flow number is quoted here. Send us your application details and we will confirm the flow data from the datasheet on request.
The L in the code marks the low-pressure regulator variant. Its exact adjustment range is not published in the catalogue, so confirm it with us before ordering if your set pressure is critical. Maximum inlet pressure remains 1.0 MPa (145 psi) and the working range is -5 to 70 C, non-freezing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.