The AirTAC GFR200C06LJF2G AirTAC Filter Regulator G1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LJF2G is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This configuration is the size 200 unit with a G1/8 (BSPP) port, a 40 um standard filtration element, the standard differential-pressure drain that discharges collected condensate automatically in service, and the low-pressure regulator type. Maximum inlet pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). An embedded square gauge scaled in psi is fitted; no mounting bracket is included and no reverse/check valve is fitted.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and options across the range include a 5 um element (code W), automatic or manual drains, G or NPT threads, MPa, psi or bar gauge scales, an external round gauge and a mounting bracket. Flow is published as curves rather than a single rating, so ask us to confirm sizing and full datasheet figures for your application before ordering.
| Model | GFR200C06LJF2G AirTAC Filter Regulator G1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Supplying filtered, low-pressure regulated air to clamp-and-hold circuits on machining and assembly fixtures, where the low-pressure regulator type suits circuits set well below main line pressure.
Feeding clean, regulated air to bench-top test rigs and pilot-scale process panels, where a compact combined filter regulator at a 1/8 inch port keeps the instrument supply tidy and stable.
Running small cylinders and actuators on packaging and conveying equipment, with the 40 um element and differential-pressure drain keeping water and debris out of the downstream valve train.
Size and port step up from 200 to 600 as flow demand grows; this size 200 unit carries a G1/8 port, the smallest in the family. Drain choice is differential-pressure (fitted here, the standard), automatic (code A) or manual (code M). Filtration is 40 um as standard; specify 5 um (code W) where finer particulate capture matters. The fitted square gauge reads in psi; MPa and bar scales and an external round gauge are alternatives. Thread is G (BSPP) on this unit - PT is the AirTAC standard and NPT is also an order option. No mounting bracket is included (code J); a bracket is available. This is the low-pressure regulator type; its exact adjustment range is not published, so confirm it with us. Flow for this family is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR family as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and full datasheet figures for this unit on request before you order.
This unit carries the standard differential-pressure drain, which discharges collected condensate automatically in normal service. If you prefer a different arrangement, automatic (code A) and manual (code M) drain versions are available across the GFR range - ask us to quote the variant you need.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.