The AirTAC GFR200C06LJF2TK AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06LJF2TK is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This size 200 unit has a 1/8 in NPT port, the 40 um standard filter element, a differential-pressure drain, the low-pressure regulator type, an embedded square gauge scaled in psi, and a built-in reverse (check) valve; no mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options include manual or automatic drains, a 5 um element (code W), G (BSPP) or NPT threads, gauge scales in MPa, psi or bar, and bracket choices. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C06LJF2TK AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding clean, regulated low-pressure air to gripper circuits on packaging and assembly robots, with the check valve holding the circuit against backflow.
Supplying regulated air to laboratory and QA test benches that run at reduced pressures and need a local psi gauge at the set point.
Regulating atomizing air to spray guns at the booth wall, with the 40 um element catching water and pipe scale before the gun.
Size 200 with a 1/8 in NPT port suits compact circuits and lighter air demand; step up to 300, 400 or 600 when the line needs a larger port. The drain here is the differential-pressure type (default); automatic (A) and manual (M) drains are order options. The 40 um element is standard - specify W for the 5 um grade where finer filtration is needed. The fitted square gauge is scaled in psi; MPa or bar scales and an external round gauge can be ordered. Thread is PT as standard with G (BSPP) and NPT as catalogue options - this unit is the NPT version. Because flow is published only as curves, not a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves, not a single rated figure, so we do not quote a number here. Tell us your line pressure and air demand and we will confirm the sizing from the datasheet on request.
This unit drains the bowl in response to the pressure differential across the filter element, so it needs no daily manual draining. If you prefer direct control, manual (M) or fully automatic (A) drain versions can be ordered in the same size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.