The AirTAC GFR200C06LJF2W AirTAC Filter Regulator PT1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LJF2W is a GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This 200-size unit has 1/8 in PT ports, a 5 um filter element (code W), a polycarbonate bowl with a differential-pressure drain, the low-pressure regulator type, and an embedded square gauge reading in psi. No mounting bracket is included (code J) and no reverse/check valve is fitted.
This is a genuine AirTAC part. The GFR range spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, plus options for automatic or manual drains, a 40 um standard element, gauge scales in MPa, psi or bar, and G (BSPP) or NPT threads in place of the PT standard. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application.
| Model | GFR200C06LJF2W AirTAC Filter Regulator PT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
On a PCB handling line, this unit cleans the shop air to 5 um and holds a gentle regulated supply to small gripper cylinders, with the psi square gauge giving operators a direct setpoint readout at the machine.
Mounted at the drop on a bottling conveyor, it filters condensed water out of the supply and regulates low-pressure air to labeling heads and guide cylinders, with the differential-pressure drain clearing collected condensate as the line runs.
On benchtop lab automation rigs, the low-pressure regulator type and fine 5 um element supply clean, reduced-pressure air to small test-station actuators, with the compact 200-size body and 1/8 in ports fitting tight panels.
The real choices on this family are all decodable from the code: size step (200/300/400/600) and port (1/8 to 1 in) matched to the flow your line needs; drain type (differential-pressure as here, automatic with A, manual with M); filter grade, where 40 um is standard and 5 um (W, fitted on this unit) suits finer filtration; gauge scale in MPa, psi or bar, with the embedded square gauge standard and an external round gauge optional; thread, where PT is the standard and G (BSPP) or NPT are order options; and bracket, which this unit omits (J). The L code selects the low-pressure regulator type, used where set pressures below the standard range are required - confirm the exact adjustment range with us. Flow is published as curves, not a single rated figure, so send your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Send us your required flow and working pressure and we will confirm sizing against the datasheet on request.
The W code fits the 5 um element in place of the 40 um standard. Choose 40 um for general plant air protection, and 5 um where downstream equipment such as fine valves, grippers or instruments needs finer filtration. Both grades are catalogue options across the GFR range, and the differential-pressure drain and psi square gauge on this unit work the same with either.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.