The AirTAC GFR200C06LJF2WG AirTAC Filter Regulator G1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06LJF2WG is an AirTAC GFR200 filter regulator: water and particulate filtration plus pressure regulation combined in a single body. This configuration is the size 200 unit with a G1/8 (BSPP) port, a 5 um filter element (the W grade, finer than the 40 um standard), a differential-pressure drain that bleeds collected condensate whenever the pressure differential across the element rises, and a low-pressure regulator type for circuits that run below standard regulating ranges. An embedded square gauge scaled in psi is fitted so the set pressure is visible at the unit, and no mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with matching port sizes, and is offered with a choice of drain type, filter grade, gauge style and scale, thread form and bracket option. Flow is published by AirTAC as curves rather than a single rated figure, so ask us to confirm the flow and datasheet figures for this exact model against your application before ordering.
| Model | GFR200C06LJF2WG AirTAC Filter Regulator G1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding the low-pressure clamping and actuation circuit of a CNC machining centre, where the 5 um element protects directional valves and the low-pressure regulator type holds a gentle, stable setpoint below standard regulating ranges.
Conditioning air at the drop to a paint spray booth on an automotive refinishing line: water and fine particulate are stripped before the gun, and the low-pressure regulation suits coating equipment that runs at modest pressures.
Supplying filtered, regulated air to the small cylinders and grippers on a food packaging machine, where the 1/8 in port matches compact drop lines and the built-in square psi gauge lets operators verify the setpoint without extra fittings.
Start with the port step: size 200 carries the smallest G-series ports, so match the 1/8 in connection to your line size and required air delivery, stepping up to GFR300/400/600 if the circuit needs more. This unit already carries the fine 5 um element (code W); the standard grade is 40 um, so choose W where downstream valves, cylinders or instruments need finer protection. Drain choice matters: differential-pressure (as fitted here) drains automatically with flow, while automatic and manual drain variants are available in the family. Gauge scale is selectable (MPa, psi or bar) and this unit ships with the square gauge in psi. Thread is G (BSPP) on this model; PT is the standard thread and G or NPT are order options. A bracket is optional (not fitted here). Because AirTAC publishes flow as curves and not as a single rated number, send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote one number here. Tell us your line pressure and the air demand of your equipment, and we will confirm the flow for this exact model from the datasheet before you order.
W is the filter grade code: this unit carries the 5 um element instead of the 40 um standard, giving finer protection for downstream components. This is also the low-pressure regulator type; its exact regulating range is not published in the catalogue material we hold, so ask us to confirm the settable range from the datasheet for your application.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.