The AirTAC GFR200C06LJF2WT | AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LJF2WT is a GFR-series filter regulator: water and particulate removal plus downstream pressure regulation in a single compact body. This size 200 configuration carries a 1/8 in NPT port, a fine 5 um filter element (code W), a differential-pressure drain that bleeds collected condensate automatically as flow passes through, and the low-pressure regulator variant for applications set below standard ranges. An embedded square gauge with a psi scale is fitted so the set pressure is visible at the unit, and the bowl on this configuration is metal. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing. No mounting bracket is included with this code.
This is a genuine AirTAC part. The GFR family is published in sizes 200, 300, 400 and 600 with a choice of ports, threads (PT standard, G and NPT as order options), drain types, 40 um or 5 um filtration, gauge scales and bracket options, so a matching unit can be specified for most lines. Rated flow is published as curves rather than a single figure, so ask us to confirm the datasheet and flow figures for your application before ordering.
| Model | GFR200C06LJF2WT | AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeding clamps and fixtures on a machining centre: the 5 um element keeps scale and pipe debris out of the clamp cylinders, while the low-pressure regulator holds a gentle, repeatable clamp force and the psi gauge lets the setter verify the setting at the unit.
Supplying sample-handling actuators and purge air inside a laboratory analyser enclosure, where fine particulate must be removed and a low, stable regulated pressure is required; the differential-pressure drain keeps condensate moving without operator attention.
Air for the extend/retract cylinders of a labelling or date-code print head on a conveyor line: clean, regulated low-pressure air protects the small actuator and valve package, and the compact size 200 body mounts directly at the drop.
Start with the port step: this unit is size 200 with a 1/8 in NPT port; if your line needs more air, step up through the 300, 400 and 600 sizes, which carry larger ports and higher flow capacity. For drainage, choose differential-pressure (this code, self-acting with flow), automatic (A) for continuous unattended draining, or manual (M) where you want a deliberate drain routine. Filtration is 5 um here (code W); the 40 um standard element suits general plant air, while 5 um protects finer pneumatic components. The fitted square gauge reads in psi; MPa and bar scales and an external round gauge are alternatives. Thread is NPT on this code - PT is the AirTAC standard, with G (BSPP) available to order. This configuration is supplied without a mounting bracket; bracketed versions exist. Because rated flow is published as curves rather than one number, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as performance curves rather than a single rated figure, so we do not quote a l/min, m3/h or SCFM number for this unit. Send us your application details and we will confirm the datasheet and the flow behaviour at your operating pressure before you order.
The W in the code selects the 5 um element instead of the 40 um standard. The 40 um grade suits general plant air; the 5 um grade on this configuration is the choice when downstream components are finer-tolerance, such as small cylinders, pilot valves or instrumentation. If you would rather run the standard grade, the same size is available without the W code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.