The AirTAC GFR200C06LJF3T AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LJF3T is a filter regulator: water and particulate filtration plus pressure regulation combined in one compact body, so you condition and control the air with a single unit instead of two. This size 200 configuration has a 1/8 in NPT port, a differential-pressure drain that bleeds collected condensate automatically whenever the pressure differential across the element rises, a 40 um standard filter element, and a square pressure gauge fitted with a bar scale. It is the low-pressure (L) type, intended for circuits that run at reduced pressures, and it is supplied without a mounting bracket. The polycarbonate bowl suits this size class, and maximum inlet pressure is 1.0 MPa (145 psi) with an operating temperature range of -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR series is published in sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, and with choices of drain type, 40 um or 5 um (W) filtration, gauge scale, thread (PT standard, G and NPT as order options) and bracket. Flow is published by AirTAC as curves rather than a single rated figure, so we confirm the datasheet and flow figures for your application on request.
| Model | GFR200C06LJF3T AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Conditioning and regulating the air feed to the cylinder and valve manifold section of a carton-sealing or wrapping machine, where the low-pressure type suits circuits set well below full line pressure and the bar-scale square gauge gives operators a direct setpoint readout.
Supplying filtered, regulated air to air-nozzle blow-off heads that dry bottles or clear debris from conveyor lanes, with the 40 um element stopping particulate from reaching the nozzles and the differential-pressure drain keeping condensate out of the circuit.
Feeding bench-mounted pneumatic test fixtures and small actuators in an R&D or quality lab, where the compact 1/8 in NPT connection, low-pressure regulation and bar-scale gauge let technicians set and observe stable reduced pressures at the point of use.
Start with the port and size step: this unit is size 200 with a 1/8 in NPT port, the smallest step in the GFR range, so step up to GFR300/400/600 if your line's flow demand points to a larger connection. Drain choice matters: this unit uses the differential-pressure drain (the default), while automatic (A) and manual (M) drains are order options where continuous bleed or manual dumping suits the installation better. Filtration is the 40 um standard element; specify the W option for 5 um if downstream equipment needs finer air. The fitted square gauge reads in bar here; MPa and psi scales are available if your panel standardises differently. Thread is NPT on this code; PT is the catalogue standard and G (BSPP) is also an option. Bracket: this code is supplied without one (J), and a bracket can be ordered where panel or wall fixing is needed. Because it is the low-pressure (L) type, confirm the adjustment range suits your circuit - we will check the exact figures against the datasheet on request. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so there is no one rated flow number we can honestly quote. Tell us your operating pressure and air demand and we will confirm the flow figures from the datasheet for this exact model on request.
The L in the code marks this as the low-pressure regulator type, intended for circuits that run at reduced pressures rather than full line pressure; its exact adjustment range is not published in the summary sheet, so we confirm it against the datasheet on request. The gauge fitted here is the embedded square type with a bar scale - MPa and psi scales are order options if your panel standardises on those.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.