The AirTAC GFR200C06LJF3TK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06LJF3TK is an AirTAC GFR-series filter regulator: it removes condensed water and particulate from compressed air and regulates downstream pressure in one body. This size 200 unit has a 1/8 in NPT port, the standard 40 um filter element, the default differential-pressure drain, an embedded square gauge scaled in bar, and a built-in check valve (code K) that blocks reverse flow through the unit. The L in the code marks the low-pressure regulator type, and the J marks that no mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options include automatic or manual drains, a 5 um element (code W), G (BSPP) or NPT threads in place of the PT standard, different gauge scales, and a reverse valve. Flow is published as curves rather than a single rating, so ask us to confirm sizing and any datasheet figure for your application before ordering.
| Model | GFR200C06LJF3TK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feed paint, glue or coating guns that must run at gentle pressures: the low-pressure regulator type is intended for setpoints below the standard range, while the 40 um element and drain bowl keep the nozzle supply clean and dry.
Combine filtration and regulation in one body on tight machine sub-panels - small indexing fixtures, pick-and-place heads or air-tool circuits fed off a 1/8 in branch - with the check valve blocking reverse flow back through the unit.
Supply bench-top test rigs, environmental chambers or lab automation with filtered, regulated air, reading the bar-scaled square gauge directly at the panel without extra instruments.
Size the unit by port and expected flow: size 200 with a 1/8 in NPT port suits light-duty drops, while sizes 300, 400 and 600 step up in port and capacity for busier lines. Drain choice matters: this unit uses the default differential-pressure drain, with automatic (A) or manual (M) versions available to order. The 40 um element is standard; specify W for the 5 um grade where downstream equipment needs finer filtration. The embedded square gauge here is scaled in bar; MPa and psi scales, and an external round gauge, are alternatives. Threads come as PT as standard, with G (BSPP) and NPT as order options - this unit is NPT. No bracket is fitted (code J). Flow is published as curves, not a single rating, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your required flow and working pressure and we will confirm from the datasheet whether this size 200, 1/8 in NPT unit suits your line before you order.
The L in the code marks the low-pressure version of the GFR200 regulator section, intended for circuits set below the standard range. The exact setpoint span for the low-pressure type is not published in our summary sheet, so we confirm it from the AirTAC datasheet on request. Everything else decodes normally: 40 um element, differential-pressure drain, square bar gauge, NPT1/8 port and a fitted check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.