The AirTAC GFR200C06LJNTK AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LJNTK is a filter regulator: it removes water and particulate from compressed air through a 40 um element and regulates downstream pressure in the same body. This unit is the low-pressure (L) type with a 1/8 in NPT port, the differential-pressure drain that is the standard drain arrangement for this series, and a built-in reverse (check) valve (K) that helps hold the downstream side if the supply dips. No gauge is fitted and no mounting bracket is included.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in and PT, G or NPT thread options, plus manual or automatic drain, a 5 um (W) filter grade, and gauge and bracket options where listed. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application before ordering.
| Model | GFR200C06LJNTK AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
On packaging and cartoning lines, this low-pressure filter regulator cleans the supply and holds a gentle, regulated pressure to clamp arms and hold-downs, while the built-in check valve keeps them from shifting if line pressure dips.
On laboratory test benches and small rigs fed from a shop-air drop, it conditions the air with the 40 um element and lets the circuit run at reduced pressure without fitting a separate filter and regulator.
For small cylinders and air-driven fixtures at the point of use, this 1/8 in filter regulator conditions the air locally, with the differential-pressure drain clearing condensate during normal operation.
Size and port step up together across the GFR range (200/300/400/600; here size 200 with an NPT1/8 port), so choose the size whose flow curve covers your demand rather than the port alone. The real, decodable choices on this family are: drain type (differential-pressure as here, automatic with A, or manual with M), filter grade (40 um standard, 5 um with W), gauge and scale (none fitted on this unit), thread (PT is the standard; G and NPT are order options - this unit is NPT), bracket (not included, code J), and standard vs low-pressure (L) regulation. This is the low-pressure type and its exact adjustment range is not published, so confirm it with us. Flow is published as curves, not a single rating - ask us to check the curve against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow curve and sizing against the datasheet on request.
GFR is the filter-regulator family, 200 is the size, 06 is the 1/8 in port, T is the NPT thread, L is the low-pressure regulator type, J means no mounting bracket, N means no gauge is fitted, and K means a reverse (check) valve is built in. Drain is the differential-pressure type and filtration is the standard 40 um grade.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.