The AirTAC GFR200C06LNTK AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C06LNTK is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This 200-size unit is ordered with 1/8 in NPT ports, the low-pressure type regulator (code L), a differential-pressure drain, and the standard 40 um filter element. No gauge is fitted (code N), and a built-in check valve (code K) blocks reverse flow through the unit. A mounting bracket is included.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in and PT, G or NPT threads. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rating, so ask us to confirm figures from the datasheet for your application.
| Model | GFR200C06LNTK AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Supplying filtered, low-pressure regulated air to clamping fixtures on a CNC machining cell, with the built-in check valve blocking reverse flow through the supply.
Conditioning the air feed to spray guns and air knives on a paint finishing line, where the 40 um element removes water and particles ahead of low-pressure regulation.
Feeding small pneumatic cylinders and grippers on a bottling or packaging conveyor, where a compact 1/8 in filter regulator sits close to the point of use.
Start with the port step: this unit is 1/8 in NPT, and the GFR series steps up through 1/4, 3/8, 1/2, 3/4 and 1 in as the size number rises from 200 to 600, so choose the size whose flow curve covers your demand. The code L marks the low-pressure regulator type; its exact adjustment range is not published, so confirm it with us before ordering if your setpoint is critical. The drain here is differential-pressure (the default); automatic (A) and manual (M) drains are order options. The 40 um element is standard and a 5 um element (code W) is available. Gauge variants carry an embedded square gauge or an external round gauge with MPa, psi or bar scales - this code specifies none. Thread is NPT here; PT is the standard and G (BSPP) is also an option. Because flow is published as curves rather than a single rating, send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and full datasheet figures for the GFR200C06LNTK on request.
The code N in GFR200C06LNTK specifies the unit without a gauge. Within the GFR series you can order a version with an embedded square gauge or an external round gauge, with MPa, psi or bar scales - tell us which you need and we will decode the right variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.