The AirTAC GFR200C06MC2W AirTAC Filter Regulator PT1/8, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C06MC2W is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and holds downstream pressure in one body. This size 200 unit is threaded PT1/8 (1/8 in), carries the 5 um filter element (the finer of the two catalogue grades), a manual drain on the polycarbonate bowl, and an external round gauge reading in psi. The regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), the unit takes up to 1.0 MPa (145 psi) inlet, and it operates at -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family runs in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, a choice of differential-pressure, automatic or manual drain, 40 um or 5 um filtration, square or round gauges in MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GFR200C06MC2W AirTAC Filter Regulator PT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds a clamping cylinder on a benchtop assembly press: the 5 um element stops scale and pipe debris reaching the directional valve, while the regulator holds the clamp pressure the operator sets on the psi gauge.
Sits at the air drop feeding the pusher and diverting cylinders of a carton packaging line, keeping the working pressure steady so box eject timing stays repeatable across the shift.
Regulates atomizing air to a spray gun in a small paint or coating booth; the 5 um element catches compressor scale that would otherwise blemish the finish, and the manual drain is emptied at each cleanup.
Size and port set the air capacity: the 200 frame with its PT1/8 connection is the smallest step in the GFR range, stepping up through 300, 400 and 600 as flow demand grows. The choices you can actually order on this family: drain type (manual here; automatic or differential-pressure are the alternatives), filter grade (this unit carries the 5 um element instead of the standard 40 um), gauge (external round, psi scale on this unit; the embedded square gauge in MPa, psi or bar scales is the standard route), thread (PT is the standard; G and NPT are order options) and the included mounting bracket. Flow is published as curves, not a single rating, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves, not as a single rated number, so there is no honest one-line flow figure to quote. Tell us your application - working pressure and the air demand of the equipment downstream - and we will confirm the sizing against the datasheet curves on request before you order.
The M in the code means the bowl drain is opened by hand to expel collected water, which suits duties where the unit is checked during routine maintenance rounds. If the unit hangs where nobody walks past regularly, the automatic or differential-pressure drain versions of the same GFR200 unit are the better choice - both are catalogue options on this series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.